Brother DCP-115C User Manual page 65

8
This product should be operated from the type of power source
indicated on the label. If you are not sure of the type of power
available, call your dealer or local power company.
Use only the power cord supplied with this machine.
9
This product is equipped with a 3-wire grounded plug, a plug
having a third (grounded) pin. This plug will only fit into a
grounded power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, call your electrician to replace
your obsolete outlet. Do not defeat the purpose of the grounded
plug.
10
Do not allow anything to rest on the power cord. Do not place
this product where people can walk on the cord.
11
Do not place anything in front of the machine that will block
printing. Do not place anything in the path of printing.
12
Wait until pages have exited the machine before picking them
up.
13
Unplug this product from the power socket and refer servicing to
Authorized Service Personnel under the following conditions:
■
When the power cord is damaged or frayed.
■
If liquid has been spilled into the product.
■
If the product has been exposed to rain or water.
■
If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
product to normal operation.
■
If the product has been dropped or the cabinet has been
damaged.
■
If the product exhibits a distinct change in performance,
indicating a need for service.
14
To protect your product against power surges, we recommend
the use of a power protection device (Surge Protector).
IMPORTANT INFORMATION 5 - 3