Belkin F9K1105 User Manual page 39

TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot connect my Router to the Internet .
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items:
1 . Use the troubleshooting suggestions within Belkin Setup.
2 . If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly. Some
user names require that the ISP's domain may be at the end of the
name. Example: "myname@myisp.com". The "@myisp.com" part of
the user name may need to be typed as well as your user name.
3 . If you continue to have no Internet connection, refer
to "Manually Configuring Network Settings" in this
manual for an alternative setup method.
belkin setup completed installation, but I cannot browse the
Web . The light on the front of my Router is blinking amber .
1 . Make sure the Router is connected to your modem with an
Ethernet cable via the Router's one WAN (modem) port.
2 . Unplug the modem from its power source and make sure
that it goes dark. Then reapply power to the modem.
3 . Unplug your Router's power supply, wait 10 seconds,
and plug it back in. This will cause the Router to try
to reestablish communication with the modem.
37