Behringer ULTRAZONE ZMX8210 User Manual

Behringer ultrazone zmx8210 mixers: user guide
Hide thumbs Also See for ULTRAZONE ZMX8210:

Advertisement

User Manual
A50-17433-00002

Advertisement

Table of Contents
loading

Summary of Contents for Behringer ULTRAZONE ZMX8210

  • Page 1 User Manual A50-17433-00002...
  • Page 2: Important Safety Instructions

    ULTRAZONE ZMX8210 Important safety instructions This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be suffi cient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accom- panying literature.
  • Page 3 Remote master Left/Right level control port for ultimate flexibility Select switch for routing microphone bus post remote control Integrated channel muting system with Priority select All inputs/outputs on Euro-type connectors High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany ULTRAZONE ZMX8210...
  • Page 4: Table Of Contents

    The task of designing our new ZMX8210 certainly meant a great deal of responsibility, which we assumed on you, the discerning user and musician. Meeting your expectations also meant a lot of work and night shifts. But it was fun, too.
  • Page 5: Introduction

    Thanks to its intuitive control panel, the unit can also be employed by inexperienced users after a short while unlike conventional mixers. The ZMX8210 gives you full control in no time to direct public address into every setting . Have fun with your new mixer.
  • Page 6: Rear Panel

    [15] for the LEFT output buses LEFT/RIGHT/AUX are linked together using the connector. The mute signal of the ZMX8210 which is set to be the master is also transmitted so that the mute function of the master is also able to mute the buses of the slave.
  • Page 7: Application

    3.1.2 Using multiple ZMX8210s In case the eight input channels of the ZMX8210 are not enough, you can link two units together by using the BUS LINKS connec- tors. The output buses of the two units are connected by routing the input signals of both units to the output buses.
  • Page 8: Basic Operation

    Connection with push-button switch and two LEDs for channel selection Basic operation Using the ZMX8210 is easy to learn and is very similar to using a standard mixer. Complete the following steps: Hook up the unit as described in Chapter 3.1.
  • Page 9 Fig. 4.4: Pin assignment of the REMOTE connector V(OLUME) connection to the potentiometer (potential) C(ONTROL) connection to the potentiometer (mid tap) SHD: SH(IEL)D connection (shield) SEL: SEL(ECT) connection to the push-button switch IND: IND(ICATOR) connection to the LEDs ULTRAZONE ZMX8210 Installation...
  • Page 10: Specifications

    Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
  • Page 11: Warranty

    Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.
  • Page 12 = Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. = Consult the dealer or an experienced radio/TV technician for help. Important information: Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the user’s authority to use the equipment. ULTRAZONE ZMX8210 BEHRINGER USA, Inc.

Table of Contents