Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba 32DT2U Owner's Manual

Adjusting the audio

Muting the sound

Press on the remote control to partially reduce
(1/2 MUTE) or turn off (MUTE) the sound. Each time
you press , the mute mode will change in the
following order:
1/2 Mute Mute
If the closed caption mode is set to Off when you
select "MUTE" mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use
volume to 0. See "Using the closed caption mode" (
page 35) for more information on closed
caption modes.
Note: If you modify items in the SOUND menu
while Mute is active, the Mute will automatically
be cancelled.

Using the digital audio selector

You can use the Digital Audio Selector to
conveniently switch between audio tracks on a digital
channel (for those channels that have multiple audio
tracks). This temporarily overrides the audio track
chosen by the language option under Audio Setup
( "Selecting stereo/SAP broadcasts").
To use the digital audio selector:
1無
and open the Sound menu.
Press
2無
Highlight Digital Audio Selector and press
3無
Press p or q to select Audio, and then press t
or u to select the desired service.
4無
Press .

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS
also can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
symbol " " or word "SAP" appears on-screen when
is pressed. The MTS feature is only available for
analog signals on the ANT/CABLE input.
Chapter 6: Using the TV's features
Volume
to set the
.
To listen to stereo sound:
1無
and open the Sound menu.
Press
2無
Highlight Audio Setup and press
3無
In the MTS field, select Stereo.
4無
To save the new settings, highlight Done and press
. To reset the settings to the factory defaults,
highlight Reset and press
Note:
• You can typically leave the TV in Stereo
mode because it will automatically output
the type of sound being broadcast (stereo
or monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 3 above, and
then press t or u to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only
on those TV stations that offer it. For example, a
station might broadcast another language as a
second audio program. If you have SAP on, you
will see the current program on the screen but
hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station's normal audio will be
output. However, occasionally there is no sound
at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the
bass, treble, and balance.
To adjust the audio quality:
1無
and open the Sound menu.
Press
2無
Highlight Audio Settings and press
3無
Press q or p to highlight the item you want to
adjust (Bass, Treble, or Balance).
4無
Press t or u to adjust the level.
• t makes the bass or treble weaker or
increases the balance in the left channel
(depending on the item selected).
• u makes the bass or treble stronger or
increases the balance in the right channel
(depending on the item selected).
5無
To save the new settings, highlight Done and press
. To reset the settings to the factory defaults,
highlight Reset and press
.
.
.
.
(continued)
37