R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
■ Gamma: Adjust the primary color intensity.
■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Flesh Tone: Emphasize pink “Flesh Tone.”
■ Motion Lighting (Off / On): Reduces power
consumption by reducing screen brightness when the
picture on the screen is in motion.
Picture Options
MENUm → Picture → Picture Options → ENTERE
Select an option using the up and down arrow keys, and
then press ENTERE. Use the arrow keys to change the
setting, and then press ENTERE.
✎
When connecting a PC, you can only make changes to
the Color Tone, Size.
Picture Options
Color Tone
: Standard
►
Size
: 16:9
Digital Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
U Move E Enter R Return
■ Color Tone (Cool / Standard / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
You can adjust and store settings for each external
device you have connected to an input on the TV.
■ Size: If you have a cable box or satellite
P.SIZE
receiver, it may have its own set of
screen sizes as well. However, we highly
recommend you use your set's 16:9 mode
most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Page 23