x
Settings can be adjusted and stored for each
external device connected to an input of the TV.
x
If you use the
Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
Digital Noise Filter (
Off / Low / Medium / High /
■
Auto): When the broadcast signal is weak, some static
and ghosting may appear. Select one of the options until
the best picture is displayed.
HDMI Black Level (Normal / Low)
: Selects the black
■
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
: Sets the TV to automatically
Film Mode (Off / Auto)
■
sense and process film signals from all sources and
adjust the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Reset
Resets your current picture mode to its default settings.
Setting up the TV with Your PC
¦
Set the input source to PC.
Auto Adjustment
t
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting through HDMI/DVI
cable.
Screen
: Removes or reduces picture noise. If the
Coarse / Fine
■
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
: Adjust the PC screen position with direction
Position
■
button (▲ / ▼ / ◄ / ►).
: Resets the image to default settings.
Image Reset
■
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)