Wps Screen - ZyXEL Communications WAP3205 User Manual

The following table describes the labels in this screen.
Table 21 Client Mode: WLAN > Site Survey
LABEL
Station Site Survey
#
SSID
BSSID
Signal
Strength
Channel
Encryption
Authentication
Network Type
Rescan
Add Profile

7.8 WPS Screen

Use this screen to enable Wi-Fi Protected Setup (WPS) on the WAP3205. Go to
Configuration > Wireless LAN > WPS to open the following screen.
Figure 40 Client Mode: WLAN > WPS
WAP3205 User's Guide
DESCRIPTION
Select a wireless device and click Add Profile to open a configuration
screen where you can add the selected wireless device to a profile and
then enable it.
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the
WAP3205 is connecting to it.
This displays the MAC address of the wireless device.
This displays the strength of the wireless signal. The signal strength
mainly depends on the antenna output power and the distance between
your WAP3205 and this device.
This displays the channel number used by this wireless device.
This displays the data encryption method used by this wireless device.
This displays the authentication method used by this wireless device.
This displays the network type (Infrastructure or Ad Hoc) of this
wireless device.
Click this button to search for available wireless devices within
transmission range and update this table.
Select a wireless device and click this button to add it to a profile.
Chapter 7 Client Mode
79