Deploying The Wap3205 In Your Network - ZyXEL Communications WAP3205 User Manual

The new profile entry displays in the Profile screen. To enable a profile, select the
3
corresponding radio button and click Activate. The green check icon means this
profile is active and the WAP3205 is associating with the specified wireless
network.

4.7.3 Deploying the WAP3205 in your Network

After you finish configuring the operating mode and wireless settings on the
1
WAP3205, disconnect the computer from the WAP3205 and change its TCP/IP
settings back to the previous ones.
Connect a device to the WAP3205, which you want to use to access the AP or
2
wireless router through the WAP3205. Make sure the device is set to obtain an IP
address automatically.
WAP3205 User's Guide
Chapter 4 Tutorials
49