Introducing The Web Configurator; Overview; Accessing The Web Configurator - ZyXEL Communications WAP3205 User Manual

C
H A P T E R

2.1 Overview

This chapter describes how to access the WAP3205 Web Configurator and provides
an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the WAP3205 via Internet browser. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions or Safari 2.0
or later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
make sure these functions are allowed in Internet Explorer.

2.2 Accessing the Web Configurator

Connect your computer to the LAN port of the WAP3205.
1
The default IP address of the WAP3205 is "192.168.1.2". In this case, your
2
computer must have an IP address in the range between "192.168.1.3" and
"192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box.
3
Enter "ipconfig" to show your computer's IP address. If your computer's IP
address is not in the correct range then see
information on changing your computer's IP address.
WAP3205 User's Guide
Introducing the Web
Configurator
(Chapter 13 on page
Appendix C on page 163
2
133) to see how to
for
23