Troubleshooting; Chapter 13 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications WAP3205 User Manual

Wireless n access point
Hide thumbs Also See for WAP3205:
Table of Contents

Advertisement

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.

Power, Hardware Connections, and LEDs

WAP3205 Access and Login
Internet Access
Resetting the WAP3205 to Its Factory Defaults
Wireless Router/AP Troubleshooting
13.1 Power, Hardware Connections, and LEDs
The WAP3205 does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the WAP3205.
1
Make sure the power adaptor or cord is connected to the WAP3205 and plugged in
2
to an appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the WAP3205.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
page
20.
Check the hardware connections. See the Quick Start Guide.
2
WAP3205 User's Guide

Troubleshooting

13
Section 1.5 on
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents