Time Setting Screen - ZyXEL Communications WAP3205 User Manual

The following table describes the labels in this screen.
Table 45 Maintenance > Password
LABEL
Password Setup
Old Password
New Password
Retype to Confirm Type the new password again in this field.
Apply
Reset

12.5 Time Setting Screen

Use this screen to configure the WAP3205's time based on your local time zone. To
change your WAP3205's time and date, click Maintenance > Time. The screen
appears as shown.
Figure 68 Maintenance > Time
WAP3205 User's Guide
DESCRIPTION
Change your WAP3205's password (recommended) using the fields as
shown.
Type the default password or the existing password you use to access
the system in this field.
Type your new system password (up to 30 characters). Note that as
you type a password, the screen displays an asterisk (*) for each
character you type.
Click Apply to save your changes back to the WAP3205.
Click Reset to begin configuring this screen afresh.
Chapter 12 Maintenance
123