Ibm Pc And Clones - Yamaha MU5 Owner's Manual

Follow these instructions if you have an IBM PC/AT or compat-
ible computer that is not equipped with an external MIDI inter-
face. Connect the TO HOST terminal on the MU5 to one of the
computer's serial ports, COM 1 or COM 2.
NOTE
1
Operation
Set the HOST SELECT switch to PC-2.
2
Connect the MU5 to the host computer, as shown in the
illustration above. Use a standard computer cable (8-pin
Mini DIN to 9-pin D-SUB; see page 22).
3
Turn on the host computer, then the MU5.
4
Start up your music software, and set up the appropriate
options on the software for operation with the MU5.
Refer to the owner's manual of your particular music software for
more information.
Setting Up the MU5 in Your Music System

IBM PC and Clones

TO HOST DC IN POWER
ON OFF
Your music software must be able to recognize
the TO HOST connection. Consult your Yamaha
dealer for more details. If your software is not
compatible, you can still use the MU5 by installing a
MIDI interface (internal card or external) to the
computer.
HOST SELECT
MIDI PC-2 PC-1 Mac
19