Making Settings For The Display, Speaker System, And Voice Number Indication - Config 2; Parameter Lock; Tap Count - Yamaha Clavinova CVP-900 Owner's Manual

Parameter Lock

This function is used to "lock" the specified parameters so that they can only be changed directly via the panel controls
— in other words, instead of via Registration Memory, One Touch Setting, Music Finder, or song and sequence data.
Selects the desired
parameter for locking/
unlocking.

Tap Count

This lets you change settings of the tap sound, used for the Tap Start function (page 52).
Determines the particular sound
used for the Tap Start function.
Any drum or percussion sound
in the Standard Kit (page 56)
can be selected.
Making Settings for the Display, Speaker System, and Voice Number
Indication — CONFIG 2
Determines the contrast of the
display.
Determines the brightness of
the backlit display.
Making Global and Other Important Settings — Function
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
Determines whether the selected
parameter is locked (checkmarked)
or unlocked (empty).
7 8
Determines the level of the tap
7 8 sound.
HEADPHONE SW (SWITCH)
Speaker sounds normally, but is cut off
when headphones are inserted to the
PHONES jack.
ON
Speaker sound is always on.
OFF
Speaker sound is off.
Determines whether or not the voice bank
and number are shown in the PRESET
page of the VOICE display (page 55). This is
useful when you want to check the proper
7 8
bank select MSB/LSB values and program
number to specify when selecting the voice
from an external MIDI device.
149
CVP-900