Effect Block - Yamaha Clavinova CVP-900 Owner's Manual

Adjust the Volume Balance and Changing Voices — Mixing Console
3
A
B
C
D
E
Switches between
the upper/lower
parameters. For the
lower parameter,
the depth can be
changed when the
[VARIATION]
button is on.
Determines the effect block.
Determines the effect category.
Determines the effect type.
4

Effect Block

Block
REVERB 1 (for Regular Voices)
REVERB 2 (for Natural Voices)
CHORUS 1 (for Regular Voices)
CHORUS 2 (for Natural Voices)
DSP 1 (for Regular Voices)
DSP 2 (for Natural Voices)
DSP 3-6 (for Regular Voices)
DSP 7
124
CVP-900
1 2 3 4 5 6
Determines the effect parameter to be adjusted.
1 2 3 4 5 6
Select the destination to which the effect is to be stored.
The number of memory spaces available for the destination
differs for each block (refer to the chart below).
Parts
All parts
All parts except microphone (MIC)
All parts
All parts except microphone (MIC)
Song (Ch. 1 - 16), Style
All parts except microphone (MIC)
Main, Layer, Left, Song (Ch. 1-16)
MIC
Calls up the display
F
for storing the effect.
G
H
I
J
Determines the level of the effect
(return level). This is not available
when BLOCK is set to "DSP1,"
PARAMETER is set to
"CONNECTION," and VALUE is
set to "Insertion" or when BLOCK
is set to "DSP 3-7".
7 8
Determines the value of the selected
parameter.
Calls up the display
for naming the User
F
Effect (page 46).
G
H
I
J
Stores the effect settings you
made above to a User Effect
location (SYSTEM) for future
recall. To call up the effect, select
USER from the CATEGORY
parameter and select the desired
effect from the TYPE parameter.
7 8
Characteristics
Reproduces the warm ambience of playing in a
concert hall or jazz club.
Produces a rich "fat" sound as if several parts
are being played simultaneously.
In addition to reverb and chorus effects, this
section features a variety of special effects,
including distortion.
This lets you apply various effects to your own
voice, via the connected microphone.
This parameter cannot be
set when BLOCK is set to
"REVERB2," "CHORUS2,"
or "DSP2" (or "BRIL-
LIANCE."
Keep in mind that in some
cases noise may result if
you adjust the effect param-
eters while playing the
instrument.
Number of User Effect
3
—
3
—
3
—
10
10