44" wide format cold process laminator and adhesive application & laminating system (26 pages)
Summary of Contents for Xyron 850
Page 1
Xyron Adhesive Application & Laminating System The Xyron 850 / Xyron 1200 is designed to be used with one of the following replacement cartridges: SL/DL: Double- and single sided lamination. LAT: Front lamination with adhesive transfer on the reverse. AT: Single - sided adhesive transfer.
Page 2
Parts and Functions Replaceable Supply Cartridge Holds various lengths and combinations of film and adhesive depending upon application. Document Feed Tray Used to guide document into dispenser. Leading edge of document slides in between tray and paddle during insertion. Align to right for A3/A4 documents, to the left for letter documents.
Page 3
Cartridge Replacement Remove feed tray by lifting upward and gently pulling away from dispenser. To Install New Cartridges Position cartridge leader between the rubber rollers in dispenser. Turn handle clockwise to advance film Insert new supply cartridge. Continue to turn handle until film is aligned and wrinkle- free.
Page 4
Supplies available for: XYRON ® Laminating Cartridges (DL and SL Series) DL201-100 Two-Sided Lamination General use - Gloss Finish SL201-100 One-Sided Lamination General use - Gloss Finish DL601-200 2 x Two-Sided Lamination General use 4 inch (106mm) SL601-200 4” w - One-Sided Lamination General Use - Gloss Finish Adhesive Application Cartridges (AT Series) AT201-50 Adhesive Application - Permanent High Tack...