Advertisement
Quick Links
Thank you for choosing a Yost Vise. For future reference please record the following:
Model #:
Purchase Date:
Supplier:
I n s p e c t i o n
Claims for damage, shortage or errors in shipping must be reported within one (1) day
following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer
receives any products to inspect such products and services for defects and
nonconformance which are not due to damage, shortage or errors in shipping and notify
Seller, in writing, of any defects, nonconformance or rejection of such products. After
such seven (7) day period, Buyer shall be deemed to have irrevocably accepted the
products, if not previously accepted. After such acceptance, Buyer shall have no right to
reject the products for any reason or to revoke acceptance. Buyer hereby agrees that such
seven (7) day period is a reasonable amount of time for such inspection and revocation.
Buyer shall have no right to order any change or modification to any product or services
previously ordered by Buyer or its representatives or cancel any order without Seller's
written consent and payment to Seller of all charges, expenses, commissions and
reasonable profits owed to or incurred by Seller. Specially fabricated or ordered items
may not be canceled or returned, and no refund will be made. The sole and exclusive
remedy for merchandise alleged to be defective in workmanship or material would be the
replacement of the merchandise subject to the manufacturer's inspection and warranty.
Product Specifications:
1.
Technical Statistics:
Model
Item
Number
Number
906-HV
14906
2.
Jaws able to withstand a load of no less than 1600 inch pounds without distortion
of the vise or any components.
3.
Hardened steel serrated jaws have a Rockwell C hardness of RC 52-58.
IMPORTANT SAFETY INSTRUCTIONS
906-HV
_____________
_____________
a n d
Jaw
Jaw
Width
Opening
6"
6"
A c c e p t a n c e
Pipe
Throat
Capacity
Depth
1/2" – 2"
3"
Weight
36lb
Advertisement
Related Manuals for Yost Vises 906-HV
Summary of Contents for Yost Vises 906-HV
- Page 1 Thank you for choosing a Yost Vise. For future reference please record the following: Model #: 906-HV Purchase Date: _____________ Supplier: _____________ I n s p e c t i o n a n d A c c e p t a n c e Claims for damage, shortage or errors in shipping must be reported within one (1) day following delivery to Buyer.
- Page 2 Warnings: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand and follow all instructions outlined below. ALWAYS make sure bench Never use a hammer, extension tops are properly secured.
- Page 3 Make sure vise selection (size and type) is appropriate for use and application. Larger vises are readily available through Yost Vises. Never force or use cheater bars, pipe extensions on the screw handle of the vise as this places excessive pressure on the vise components and they may fail resulting in severe bodily injury.
- Page 4 Step 4: Place item between the serrated jaws of the vise. Step 5: Close the vise by turning the vise handle clockwise until the item is snug between the serrated jaws. Step 6: Continue to tighten the screw handle until you can no longer move (twist) the clamped item.
- Page 5 Parts List When unpacking the completely assembled vise check to make sure there are no missing or broken parts. Call Yost Vises at (616) 396-2063 or email us at sales@yostvises.com should a problem arise. Parts List 906-HV “All Steel Utility Vise”...