All Group Play/Program Play/Random Play; Program Play - Panasonic SC-HT900 Operating Instructions Manual

[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Common procedures for all group, program
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3]
All group ([DVD-A])>Program> Random>off (Normal play)
^-------------------------------------------------------------------------------------}
[VCD] [CD]
(PGM)>1-DISC (RND)>ALL-DISC (RND)>off (Normal play)
^------------------------------------------------------------------------------------------}
[DVD-A]
If you select bonus groups, you will have to enter a password
(➡ page 17).
All group play
[DVD-A]
The unit plays tracks in all the groups on a disc.
Press [1] (play).

Program play

You can select up to 24 items to play in the order you choose.
[VCD] [CD] (There is no on-screen display.)
You can program all the items on discs.
[DVD-A] [DVD-V] [WMA] [MP3]
You can program all the items on a disc in the play position.
Example [DVD-V]
PROGRAM Choose a title and chapter, then press ENTER.
T C
No Time
1 Play
Clear
Clear all
0 9
SELECT
NUMBER
SELECT
Press PLAY to start
ENTER RETURN
1
[VCD] [CD]
Press the [DISC] and then the disc
button ([DISC 1]–[DISC 5]).
2
Press the numbered buttons to select
a title, chapter, group or track (
then press [ENTER]).
Example [CD]
TRCK
Disc No.
Track No.
≥To select a 2-digit number
Example: To select item 25, press [S10] ➡ [2] ➡ [5].
[WMA] [MP3] [2] ➡ [5] ➡ [ENTER]
≥Repeat this step to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
\Note\
Disable HighMAT disc play to use random and program play.
In the SETUP menu, set "HighMAT" to "Disable" (➡ page 34) and perform the necessary operations (➡ above).
[WMA] [MP3]
PGM
Program No.
≥[DVD-A] [DVD-V] [WMA] [MP3]
To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press
[ENTER] again to register the number.
All the items in the selected disc, title or group are selected
when you select "ALL".
3
Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3]
Press [3, 4] to select an available item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3]
1 Select the item you want to clear with [3, 4].
2 Press [CANCEL], or select "Clear" with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
[VCD] [CD]
Press [∫] so "CLEAR" is displayed.
[DVD-A] [DVD-V] [WMA] [MP3]
Select "Clear all" with [3, 4, 2, 1] and press [ENTER].
\Note\
≥[DVD-V] [WMA] [MP3]
Times are not displayed while programming.
≥[VCD]
[CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE]
or move the disc out of the play position.
[VCD] [CD]
The program is retained in memory.
Random play
[VCD] [CD] (There is no on-screen display.)
1-DISC (RND): You can play a disc in the play position in random
order.
ALL-DISC (RND): You can play all discs in random order.
[DVD-A] [DVD-V] [WMA] [MP3]
You can play items on a disc in the play position in random order.
1
[DVD-A] [DVD-V]
Press the numbered buttons to select
a title or a group.
RND
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select "All" using [2, 1] and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
2
Press [1] (play).
[Note\
During random play, empty trays are skipped and the playback
control function on Video CDs is canceled.
Example [DVD-V]
Random Playback
Title 1
0Press PLAY to start
RQT6750
19