Wharfedale Pacific Evolution Series Installation and User Guide Introduction The Wharfedale Pacific Evolution Series is a range of versatile loudspeakers using advanced materials and the latest precision drivers. Pacific Evolution 8 and 10 are small stand mounting loudspeakers, The Pacific Evolution 20, 30 and 40 are floor-standing models.
Connecting Your Loudspeakers Standard Connections Choose a suitable length of twin core speaker cable for each channel, and prepare the ends as described above. Unscrew each terminal a few turns but leave the straps in place. Connect the red, positive (+) terminal of the Left loudspeaker to the corresponding red, positive (+) amplifier terminal.
The Pacific Evolution DFS-20 Surround Loudspeaker Connect the cable to the speaker. The speaker should ideally be sited 600 mm-1.5 metres above the listening position and 2.5-3.5 metres apart, central to the listener and behind the listening position, preferably on a rear wall. If the listening position is some distance from a rear wall, the loudspeakers may be mounted on opposite side walls but always behind the listening position.
Apply the spray sparingly to the cloth and then polish the cabinet. Never apply spray directly to the cabinet. Guarantee & Service In the unlikely even that your unit develops a fault you should return it to your Wharfedale dealer using the original packing to ensure safe shipping. Troubleshooting If your system appears not to be working as well as you expect, the following notes may be of some help.
1932 Loudspeaker Manufacturers since 1932 In 1932, when Gilbert Briggs founded the Wharfedale Wireless Works, his company was at the leading edge of an exciting new technology which was dedicated to bringing the pleasure of music and entertainment to a wide range of people. As the technology advanced Wharfedale...