Vivotek FD6112V User Manual
  1. Manuals
  2. Brands
  3. Vivotek Manuals
  4. Security Camera
  5. FD6112V
  6. User manual

Vivotek FD6112V User Manual

Day/night vandal-proof network dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Vivotek FD6112V

Summary of Contents for Vivotek FD6112V

  • Page 2 Product name: Network Camera (FD6112V/FD6122V) Release Date: 2006/03/15 Manual Revision: 1.10 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2005. All rights reserved - 1 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 3: Before You Use This Product

    For paragraphs preceded by completely the warnings. Ignoring the warnings may result in serious hazards or injuries. the reader should use caution to understand - 2 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 4: Package Contents

    Package Contents FD6112V/FD6122V Power adapter Screw Pack Software CD Quick installation guide Warranty card - 3 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 5: Table Of Contents

    Select for Motion JPEG ... 22 Opening Accounts for New Users ... 23 Protect Network Camera by Passwords ... 23 More Flexible Options for Viewers ... 24 Build a Multimedia Web Attraction Site... 24 - 1 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...
  • Page 6 Event Operation ... 52 Sequential Operation ... 53 Naming rule of snapshot file... 54 Viewing System Log ... 56 Viewing System Parameters ... 56 Factory Default ... 56 Appendix ... 57 A. Troubleshooting ... 57 - 2 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...
  • Page 7 Capture single snapshot ... 82 Account management ... 83 System logs... 84 Configuration file ... 85 System Information ... 86 D. Technical Specifications... 88 Technology License Notice ... 6 Electromagnetic Compatibility (EMC) ... 6 - 3 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 8: Installation

    'LOW'. The relay switches Pin 1 and Pin 2 can be used to turn on or off an external device. - 4 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 9: Mount The Camera

    OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) INPUT (Max. 50mA, 12VDC) INPUT (Initial state of DI is low) - 5 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 10 2. Fix the camera to the wall/ceiling with four supplied screws 3. Make connections - 6 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...
  • Page 11 4. Use the pan/tilt mechanism to set the camera to a proper position 5. Attach the dome cover back to the camera - 7 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...
  • Page 12 To completely avoid the camera from water sock, apply waterproof process if necessary. 1. Utilize silicone clay or similar waterproof material applied to the screws, screw holes and other necessary portions. 2. Tape the junction points of the connecters on the cable. - 8 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 13: Software Installation

    (If the program is not on auto-run, go to the root directory of the software CD and click on “autorun.exe”). Click on “Software Utility” item, after the window contains changed, click on “Installation Wizard” to run Vivotek’s installation program. - 9 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...
  • Page 14 Upon Installation Wizard’s start up, a searching box will pop up. searches for Vivotek’s product on the same LAN: After searching, Vivotek Video Servers or Network Cameras will be located by the Installation Wizard. There may be several entries shown...
  • Page 15 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED blinks. The Vivotek’s new UPnP function will always assign an IP address for the Network Camera. The Administrator can click on button “Link to selected device” to connect the I.E.
  • Page 16 For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard. - 12 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 17: Initial Access To The Network Camera

    If the web browser does not allow the user to continue to install, check the Internet security option and lower the security levels or contact your IT or networking supervisor for help. - 13 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 18: Check Network Settings

    Once the password is set, there is no provision to recover the Administrator’s password. The only option is to restore to the original factory default settings. - 14 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 19: How To Use

    The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. - 15 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 20: Primary User's Capabilities

    Primary User’s Capabilities Main Screen with Camera View The main page layout has two parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. - 16 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 21: The Configuration

    Network Camera to different target. Using mouse to click on the target inside the video will command the Network Camera to aim at the target and with the mouse wheel up or down, the camera view will zoom out or in. Microphone volume Speaker volume - 17 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 22: Client Settings

    If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol and save, then return to HOME to connect to the Network Camera. - 18 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 23 JPEG image from server according to the “Frame rate” settings. Talk Button Control Style – For the User to determine whether to “click once and talk” or “push to talk”. - 19 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 24: Administrator's Capabilities

    The six factors, “Size”, “Maximum frame rate”, “Video codec type”, “Key frame interval”, “Fix bit rate”, and “Fix quality” on the Video Configuration page, are correlative to allow for achieving the best performance possible. - 20 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 25: For Best Real-Time Video Images

    “broken” pictures, go to the HTTP protocol in “Connection type” and choose a more appropriate mode of transmission. The images may suffer a time delay due to a slower connection. - 21 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 26: Somewhere Between Real-Time And Clear Images

    General speaking, each normal sized JPEG image would be 3k~12k bytes, depending on the selected video quality and contents. Together with the frame rate selected, the administrator can control the bandwidth of each connection. - 22 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 27: Opening Accounts For New Users

    That allows multiple visitors share the same account of different level. Each account has four kinds of privileges, which can be set individually. The “I/O access” privilege permits the user - 23 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 28: More Flexible Options For Viewers

    If you want to expand to allow in more viewers, the host server should be able to handle large network traffic, which must handle the picture refreshing from the Network Camera. - 24 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 29: If The Web Space Has Ftp Service

    Set the Network Camera up as an FTP client to upload the pictures. The access to the Network Camera will be independent of the number of viewers and the picture quality will remain constant. - 25 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 30: If The Web Space Has No Ftp Service

    Network Camera. Define the refresh interval according to your network bandwidth for best result. If the refresh rate is too fast and there is a large number of visitors, this may overload the Network Camera and slows the response. - 26 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 31 Date(); setTimeout('refresh()', refreshrate*1000);} document.write('<img width="'+imgwidth+'" name="pic">'); if(document.images)window.onload=refresh; </script> <!-- End of scripts to auto refresh the image. //--> </p> </body> </html> //SECONDS BETWEEN REFRESH //IMAGE WIDTH //IMAGE HEIGHT src="'+image+'" height="'+imgheight+'" - 27 - //IMAGE URL www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 32: Build A Security Application

    5. Set the delay before detecting next event to avoid continuous false alarms following the original event, coming from be set to - 28 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 33: Send Snapshots When Motion Is Detected

    Administrator and red means it is over the watermark, 13. Click on “Application” in the left column, 14. Check on the window name set in step 9, - 29 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 34 15. Check “Upload snapshots while motion detected”, if e-mailing the snapshots is preferred, 16. Check “Send snapshots by email”, 17. Click on “Save” to validate. - 30 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 35: Definitions In Configuration

    <url> http://<Network Camera>/setup/config.html <Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 31 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 36: System Parameters

    “Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server. Remember to click on correct time will not be synchronized. to immediately validate the changes. Otherwise, the - 32 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 37: User Group Administration

    “Edit user” Pull down the user list to find the user’s name and press user’s password and privilege. , the web browser will ask the - 33 - to insert the to edit the www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 38 <url> http://<Network Camera>/setup/security.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 34 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 39: Edit User

    Edit User Type the new password, change the privilege and press <url> http://<Network Camera>/setup/edituser.vspx <Network Camera> is the domain name or original IP address of the Network Camera. to modify the account. - 35 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 40: Network Settings

    Invalid router setting will fail the transmission to destinations in different subnet. “Primary DNS” The primary domain name server that translates hostnames into IP addresses. “Secondary DNS” The secondary domain name server that backups the Primary DNS. - 36 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 41: Http

    5002 in order to work with the port opened by the firewall. “UDP Audio video channel port” This can be something other than the default port 5003 in order to work with the port opened by the firewall. - 37 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 42 <url> http://<Network Camera>/setup/network.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 38 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 43: Ddns & Upnp

    If your camera is behind an NAT router and your router supports UPnP port forwarding, turn on this option will help you to access your camera. “Save” Click on this button to save current settings for the DDNS service and UPnP function. - 39 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 44 <url> http://<Network Camera>/setup/ddnsupnp.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 40 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 45: Mail & Ftp

    “1st FTP password” Granted password on the external FTP server. “1st FTP remote folder” Granted folder on the external FTP server. This folder is for system log information and for images captured due to sequential operation or digital - 41 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 46 “2nd FTP remote folder for motion detection” Granted folder on the external FTP server. This folder is for images captured due to motion detection events. “2nd FTP passive mode” Passive mode setting for the backup FTP server. - 42 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 47 <url> http://<Network Camera>/setup/mailftp.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 43 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 48: Video Codec Parameters

    "Flip" Vertically rotate the video. "Mirror" Horizontally rotate the video. Check options both if the Network Camera is installed upside down. “Improve efficiency in the multi-user environment” Check this option to frames frames - 44 - following sequence. www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 49 “Size” becomes Normal or Double, “Text on video hh:mm:ss yyyy/mm/dd” b) “Size” becomes half, “hh:mm:ss yyyy/mm/dd” <url> http://<Network Camera>/setup/video.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 45 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 50: Image Settings

    “Preview” to fine-tune the image. When the image is O.K., press “Save” to set the image settings. “Restore” to recall the original settings without incorporating the changes. - 46 - “Hue” video eleven levels Click www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 51: Camera Settings

    In the Camera Settings window, click on “Preview” to see the effect of changing the options. Click on “Save” to set the Camera Settings. Click on “Restore” to recall the original settings incorporating the changes. - 47 - without www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 52: Audio

    “Bit rate” There are three kinds of bit-rate for audio. 32Kbps and 24Kbps are suitable for both music and speech like audio while 8Kbps are suitable for only speech like audio. - 48 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 53 <url> http://<Network Camera>/setup/audio.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 49 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 54: Motion Detection

    “Sensitivity” This sets the endurable difference between two sequential images. “Percentage” This sets the space ratio of moving objects in the monitoring window. Higher sensitivity and small percentage will allow easier motion detection. - 50 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 55 <url> http://<Network Camera>/setup/motion.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 51 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 56: Application Setup

    User to the configuration page for motion detection. “Trigger action” There are four options for two types of action. More than one condition can be selected at once. While choosing to trigger an output alarm, the - 52 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 57: Sequential Operation

    Please check naming rule of snapshot file for more detail. - 53 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 58: Naming Rule Of Snapshot File

    Example: Network Camera *** Event snapshots: Motion detected *** From: http://192.168.1.53 <prefix>_1_pre.jpg 2005/01/07 18:09:16 <prefix>_2_pre.jpg 2005/01/07 18:09:17 <prefix>_3_pre.jpg 2005/01/07 18:09:18 <prefix>_4_trg.jpg <prefix>_5_pos.jpg 2005/01/07 18:09:20 Note: - 54 - Event order) order) 2005/01/07 18:09:19 Network Camera www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 59 <url> http://<Network Camera>/setup/app.vspx <Network Camera> is the domain name or original IP address of the Network Camera. - 55 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 60: Viewing System Log

    This function is the same as the “Center” button on the Remote Controller. Please note that there is no confirming message box after clicking on the “Calibrate” button, the Network Camera will calibrate immediately. - 56 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 61: Appendix

    RESET: Press the button once. RESTORE: 1. Press the button continuously. Plug power self-diagnostic. to run twice. 3. Release the button after both LEDs shut off. as - 57 - wait www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 62 - 58 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 63 Q Why is the timestamp different from the system time of my PC or notebook? A The timestamp is based on the system time of the Network Camera. It is maintained by a real-time clock inside and can be automatically synchronized with - 59 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 64 Network Camera, make sure you are using internal or external microphone. Q How many users are allowed to watch the Network Camera at the same time? A Too many users requesting the real-time multimedia content will jam the network. - 60 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 65 A Since the Network Camera is a "network camera", any incorrect network settings will make it inaccessible. If this happens, restore the factory default settings following the procedures in Appendix A. - 61 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 66: Url Commands Of Network Camera

    <servername>. This is intended to be replaced with the name of the actual server. This can either be a name, e.g., "mywebcam" or "thecam.adomain.net" or the associated IP number for the server, e.g., 192.168.0.220. Syntax: http://<servername>/cgi-bin/video.jpg - 62 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 67: General Cgi Url Syntax And Parameters

    The file extension of the CGI is required. Syntax: http://<servername>/cgi-bin/<subdir>[/<subdir>...]/<cgi>.<ext> [?<parameter>=<value>[&<parameter>=<value>...]] Example: Setting digital output #1 to high http://mywebserver/cgi-bin/setparam.cgi?do1=h Get server parameter values Note: This request require administrator access Method: GET/POST Syntax: - 63 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 68 <parameter pair> is <parameter>=<value>\r\n [<parameter pair>] <length> is the actual length of content. Example: request IP address and it’s response Request: http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress Response: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n - 64 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 69: Set Server Parameter Values

    If you omit this parameter, it will redirect to an empty page. (note: The return page can be a general HTML file(.htm, .html) or a Vivotek server script executable (.vspx) file. It can not be a CGI command.

  • Page 70: Available Parameters On The Server

    VALUE hostname <text string shorter (r/w) than 40 characters> ledoff (r/w) DESCRIPTION host name of server <<Wireless>Network <with Pan/Tilt/<Zoom>>> Do not turn off the led indicator Turn off the led indicator - 66 - Camera www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 71 Restore the system parameters to default value and restart the server after <value> seconds. Restart the server after <value> seconds. Not restart the server. - 67 - sync date/time sync date/time automatic time automatic www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 72 The privilege can be the combination of dido – Permit I/O access talk – Permit to talk to server listen – Permit to listen from server conf – Permit change configuration - 68 - supported server’s www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 73 <blank> secondary DNS server <blank> primary SMTP server <blank> mail recipient address <blank> shorter User name of primary smtp server <blank> shorter Password of primary smtp server <blank> secondary SMTP server <blank> - 69 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 74 FTP server <blank> Enable passive mode of primary FTP server Disable passive mode of primary FTP server secondary FTP server secondary FTP port <21> shorter user name for secondary FTP server <blank> - 70 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 75 Channel port for UDP <5002> DESCRIPTION enclosed caption <blank> MPEG4 MJPEG Key frame interval <120> half half x 2 normal normal x 2 double monochrome color fix bit rate fix quantization lowest quality of video - 71 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 76 15 fps set maximum frame rate to 20 fps set maximum frame rate to 25 fps set maximum frame rate to 30 fps NTSC AUTO NTSC flip image normal image mirror image - 72 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 77 Send audio from active client to all other clients (only possible in Half-duplex) Use external microphone in Use build microphone Disable bandwidth support Improve in low bandwidth environment Disable Enable DESCRIPTION Adjust brightness of image according to - 73 - environment www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 78 Set auto gain control to MAX level Apply the parameter of image but not save Restore last parameters Directly save parameters DESCRIPTION disable motion detection enable motion detection disable motion window #1 - 74 - adjust image saved image adjust image www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 79 Sensitivity motion window <0> Update the above motion detection settings to take effect DESCRIPTION Enable or disable the dynamic dns. <0> dyndns.org (dynamic) dyndns.org (custom) tzo.com dhs.org <1> Your dynamic hostname. - 75 - detection www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 80: Application Page Cgi Command

    Update the above ddns settings to take effect DESCRIPTION Enable or disable the UPNP service. <1> DESCRIPTION File name of script <script.vssx> Disable script Enable script DESCRIPTION support motion detection/dido/video loss information in video bitstream - 76 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 81 [&ioupload=<value>][&mdupload=<value>][&seqop=<value>][&sinter=<value>] [&smethod=<value>][&suffix=<value>][&resetdo=<value>] Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <length>\r\n \r\n <depends on method value> If(method == get || method == set) tue=<value>\r\n wed=<value>\r\n … Else if(method == normal) Application page contents - 77 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 82 Disable/Enable all the time except for the above schedule check box Disable/Enable Event operation Delay seconds before detect next event Number of pre-trigger event images string Snapshot file name prefix for both event and sequential operation - 78 - weekly schedule www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 83 Interval of sequential snapshot in second Send snapshot by e-mail Send snapshot by ftp Enable/Disable FTP put snapshots with date and time suffix Reset/No reset DO when click save button - 79 - when motion snapshot when www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 84: Drive The Digital Output

    The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 80 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 85: Query Status Of The Digital Output

    Example: Query the status of digital input 1 Request: http://myserver/cgi-bin/getdi.cgi?di1 Response: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: 7\r\n \r\n di1=H\r\n Query status of the digital output Note: This request requires the privilege of I/O access control. Method: GET/POST - 81 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 86: Capture Single Snapshot

    Example: Query the status of digital output 1 Request: http://myserver/cgi-bin/getdo.cgi?di1 Response: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: 7\r\n \r\n do1=H\r\n Capture single snapshot Note: This request require normal user privilege Method: GET/POST - 82 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 87: Account Management

    “username” field is necessary. It will use default value of other fields if not specified. Remove an account from server. When using this method, “username” field is necessary, and others are ignored. - 83 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 88: System Logs

    The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 84 - privilege www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 89: Configuration File

    Configuration file Note: This request requires administrator privilege Method: GET/POST Syntax: http://<servername>/cgi-bin/admin/configfile.cgi Server will return the up-to-date configuration file. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <configuration file length>\r\n \r\n <configuration data>\r\n - 85 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 90: System Information

    => Support pan operation. 0(not support), 1(support) Bit 3 => Support tilt operation. 0(not support), 1(support) Bit 4 => Support zoom operation. 0(not support), 1(support) Bit 5 => Support focus operation. 0(not support), 1(support) - 86 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 91: Preset Locations

    The <return page> can be a full URL path or relative path according to the current path. If you omit this parameter, it will redirect to an empty page. - 87 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 92: Technical Specifications

    Adapter output: 12VDC, 1.5A - Operating Environment Temperature: 0-50°C/32-122°F Humidity: 95%RH -EMI & Safety CE, FCC, LVD - Viewing system requirement Operating System Microsoft Windows 98SE/ME/2000/XP Browser Internet Explorer 5.x or above - 88 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 93: Technology License Notice

    MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM. - 6 - T: 886-2-82455282 F: 886-2-82455532 www.vivotek.com...

  • Page 94: Electromagnetic Compatibility (Emc)

    Vivotek Inc. cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

This manual is also suitable for:

Fd6122v

Table of Contents