First Access To Networkam - Vivotek IP3111/IP3121 User Manual

First access to NetworKam

Through direct connection by null modem cable administrators can open the default web browser and
type in 200.1.1.1 as the address and press enter. Note that 200.1.1.1 will be the default IP address in a
dial-in connection and 200.1.1.100 will be the given IP address for the user's PC by NetworKam. The user
name and password are the same as what was entered during installation.
After successful authentication, administrators should see the motion pictures in the main page. When
using Microsoft Internet Explorer, administrators should allow a plug-in provided by NetworKam to
install additionally. For best security, administrators must change the password on the system page of
configuration immediately. After changing the password, the browser will display the authentication
window again to ask for new password. Note that the new password will also be used in the next dialup.
To make NetworKam successfully work in dial-in and dial-out modes, follow the procedures below for
33
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097