Page 1
Access control DG 800 Combined Proximity and Keypad Access • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • Backlit keypad • Weather resistant: IP65 • Vandal resistant • 2 LED displays with audible indication...
Page 2
12~24VAC/DC DG-160: Pull In:60mA/12VDC,Holding:40mA/12VDC Pull In:30mA/24VDC,Holding:20mA/24VDC DG-800: Pull In:100mA/12VDC,Holding:70mA/12VDC Pull In:50mA/24VDC,Holding:35mA/24VDC EM 125KHz 5 cm (In noise-free environment) Backlight 12-digit (0~9,*,#) Relay Rating Max.2A/30VDC ; 0.6A/120VAC Diode Right Green Stay On All LEDs Stay On Red Stay On 1. Memory volume up to 1000+10 proximity cards/tokens and PINs. Reading time approx.
Page 3
1. Enter programming mode b. 1. Enter programming mode to select slot position 000~999 (Left Red LED stay 2. Press * 6 (Right Yellow LED rapid flash) on, Right Yellow LED rapid flash to indicate the slot position is unavailable) 3.