TEC SL-9000 Owner's Manual page 31

11. PROGRAMMING PROCEDURES
Pressing the
↓
key returns to the preceding menu.
Verification label of PLU data
NOTES:
1. A UPC code is made up of a combination of an entered code and an AUTO CODE. Be
sure to attach some
will be ignored and an AUTO CODE will become an UPC code (see ex. 1).
ex. 1) enter code:
AUTO CODE: 123---
code#: 123456
2. When there is no area to store PLU data, an error occurs when pressing the
3. Changing a PLU # to the number to which other PLU data is set will result in an error.
4. Unit price flag may be selected as follows:
1) In case of lb scale
a.
b.
c.
2) In case of kg scale
a.
5. Tare limit should be a multiple of 5, up to 2.000 lb for US type and a multiple of 2, up to
1.000 Kg for CA/QR type.
6. Safe handling instructions can be printed on 57-mm wide labels only. Safe handling
instructions are printed on labels formatted for ingredient messages. Only ingredient
message labels with 13 or more lines can be used to print safe handling instructions.
Available print formats are as follows:
13 (63), 15 (65), 16 (66), 23 (73), 25 (75), 26 (76), 33 (83), 35 (85), 36 (86), 41, 42, 43, 48
and 49.
7. Tare % indicates a percentage of tare in gross weight, which is available when the initial
Setting #8-7 is set to 1 (SL-9000) or #28-4 is set to 1 (SL-9000N).
8. When setting open prices in the count mode (Initial Setting #1-6: 1), set zeros as quantity
and unit price.
key instead of the
456
↓
key : $ per lb
INSERT 1
key : $ per 1/2 lb
DELETE (A) 1/2
key : $ per 1/4 lb
RETURN 1/4
key : $ per 100 g or Kg
INSERT 1
key advances to the next menu. Pressing the
ENTER
characters to the end of the AUTO CODE, or all entered codes
ex. 2) enter code:
AUTO CODE: 123---
↓
code#: 123567
11- 6
11.2 PLU DATA SETTING
(W: Weigh, F: Fix, B: By-count)
(C: Compulsory, Blank: Not
compulsory)
4567 ex. 3) enter code:
AUTO CODE: 987
code#: 987
↑
123456
↓
key.
ENTER