Unpacking/Transport/Storage - THOMSON LDK 4502 User Manual

Unpacking/Transport/Storage

Unpacking
Inspect the shipping container for evidence of damage
immediately after receipt. If the shipping container or
cushioning material is damaged, it should be kept until the
contents of the shipment have been checked for
completeness and the units have been checked
mechanically and electrically.
The shipping container should be placed upright and
opened from the top.
Remove the cushioning material and lift out the contents.
The contents of the shipment should be checked against
the packing list. If the contents are incomplete, if there is
mechanical damage or defect, or if the units do not perform
correctly when unpacked, notify your Thomson Multimedia
Broadcast Solutions sales or service centre within eight
days. If the shipping container shows signs of damage or
stress, notify the carrier as well.
Transport
If a unit is being returned to Thomson Multimedia Broadcast
Solutions for servicing, try to use the containers and
materials of the original packaging. Attach a tag indicating
the type of service required, return address, model number,
full serial number and the return number which will be
supplied by your Thomson Multimedia Broadcast Solutions
service centre.
2-2 User's Guide LDK 4502 - HDTV Camera Base Station
If the original packing can no longer be used, the following
general instructions should be used for repacking with
commercially available materials:
a. Wrap unit in heavy paper or plastic.
b. Use strong shipping container.
c. Use a layer of shock-absorbing material around all
sides of the unit to provide firm cushioning and prevent
movement inside container.
d. Seal shipping container securely.
e. Mark shipping container FRAGILE to ensure careful
handling.
Storage
The unit may be stored (non-operating condition) in
environments within the following limits:
Temperature: -40
Humidity: Max. 90% (non condensing)
Altitude: max. 50.0000 feet
When stored, the unit should be protected from temperarure
extremes which may cause condensation, and should also
be protected from high levels of dust.
o o
C to +70 C
Installation