Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Subaru Subaru PKV401T
Summary of Contents for Subaru Subaru PKV401T
- Page 1 PKV401T 9ZZ9990043 北米...
- Page 2 Single grade 10W-30 Multi grade 10W-40 Ambient temperature 40 C 104 F...
- Page 3 ( L ) ( L ) ( H ) ( L ) ( H ) 0.7 - 0.8 mm...
-
Page 4: Air Index
WARNING : The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. FEDERAL EMISSION COMPONENT DEFECT WARRANTY and CALIFORNIA EMISSION CONTROL WARRANTY are applicable to only those engines/ generators complied with EPA (Environmental Protection Agency) and CARB (California Air Resources Board) emission regulations in the U.S.A. - Page 5 FEDERAL EMISSIONS COMPONENT DEFECT WARRANTY EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE – of California. Fuji Heavy Industries Ltd. and Robin America Inc., Wood Dale Illinois, (herein “ROBIN AMERICA”) warrant(s) to the initial retail purchaser and each subsequent owner, that this Nonroad engine (herein “engine”) has been designed, built, and equipped to conform at the time of initial sale to all applicable regulations of the U.S.
-
Page 6: California Emissions Control Warranty Statement
CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board and Fuji Heavy Industries Ltd. (herein "FUJI") are pleased to explain the emissions control system warranty on your small off-road engine (SORE). In California, new SOREs must be designed, built and equipped to meet the State's stringent anti-smog standards. - Page 7 (c) WARRANTED PARTS: The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if FUJI demonstrates that the engine has been abused, neglected, or improperly maintained, and that such abuse , neglect ,or improper maintenance was the direct cause of the need for repair or replacement of the part.
-
Page 8: Table Of Contents
Thank you very much for purchasing a ROBIN PUMP. This manual covers operation and maintenance of ROBIN PUMP. All information in this publication is based on the latest product information available at the time of approval for printing. Please read this manual carefully before operating. Please take a moment to familiarize yourself with the proper operation and maintenance procedures in order to maximize the safe and efficient use of this product. -
Page 9: Safety Precautions
1. SAFETY PRECAUTIONS Please make sure you review each precaution carefully. Pay special attention to statement preceded by the following words. WARNING “WARNING” indicates a strong possibility of severe personal injury or loss of life if instructions are not followed. CAUTION “CAUTION”... - Page 10 Do not touch the spark plug and ignition cable when starting and operating the engine. ■ Operate the pump on a stable, level surface. ■ If the engine is tilted, fuel spillage may result. NOTE Operating the pump at a steep incline may cause seizure due to improper lubrication even with a maximum oil level.
-
Page 11: Components
SYMBOLS Read the owner's manual. Stay clear of the hot surface. Exhaust gas is poisonous. Do not operate in an unventilated area. Stop the engine before refueling. Fire, open flame and smoking prohibited. On (Run) Off (Stop) Engine oil Add oil 2. -
Page 12: Pre-Operation For Starting
3. PRE-OPERATION FOR STARTING (See Fig. 2 2 2 2 2 ) 1. CONNECT SUCTION HOSE (See Fig. 2 2 2 2 2 -q q q q q ) Use a reinforced-wall or wire braided hose to prevent suction collapse. Since the pump self-priming time is directly proportional to hose length, a short hose is recommended. -
Page 13: Operating Your Pump
4. OPERATING YOUR PUMP 1. STARTING (See Fig. 3 3 3 3 3 ) (1) Open the fuel cock. (See Fig.3-q) q OPEN w CLOSE (2) Turn the STOP SWITCH to the position “ (See Fig.3-w) (3) Set the speed control lever 1/3 to 1/2 of the way towards the high speed position. -
Page 14: Periodic Inspection
2. PERIODIC INSPECTION Periodic maintenance is vital to the safe and efficient operation of your pump. Check the table below for periodic maintenance intervals. IT IS ALSO NECESSARY FOR THE USER OF THIS PUMP TO CONDUCT THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION-RELATED PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL SYSTEM EFFECTIVE. -
Page 15: Cleaning Fuel Strainer
3. INSPECTING THE SPARK PLUG (See Fig.7 7 7 7 7 -q q q q q ) (1) Clean off carbon deposits on the spark plug electrode using a plug cleaner or wire brush. (2) Check electrode gap. The gap should be 0.03 in. (0.7 mm to 0.8 mm). -
Page 16: Preparations For Storage
6. PREPARATIONS FOR STORAGE 1. WATER (See Fig.8 8 8 8 8 -q q q q q ) Drain all water from the drain plug. CAUTION When retightening drain plug, be sure to clean the drain plug and the thread of casing. Otherwise, the thread may be damaged. -
Page 17: Easy Troubleshooting
9. EASY TROUBLESHOOTING 1. PUMP DOES NOT RUN . Engine dose not start. ■ (See 9.-4 “4. WHEN ENGINE DOES NOT START Sticking of impeller ■ (Disassemble and clean.) 2. PUMPING VOLUME IS SMALL. Sucking air at suction side. ■ (Check piping at suction side.) Drop off engine output ■... -
Page 18: Specifications
10. SPECIFICATIONS MODEL Type Suction x Delivery Diameters mm(in.) Total Head m(ft) Maximum Delivery Volume Liter(U.S.gal) / min Suction Head m(ft) Axle Seal Material (Mechanical Seal) Model Type Lublicant Oil Capacity Liter (U.S.gal) Fuel Fuel Tank Capacity Liter (U.S.gal) Spark plug Starting system Dimensioms (L x W x H) - Page 19 ISSUE EMD-PU2255 PRINTED IN JAPAN October 2006...