Sony HDV HVR-1500 Operating Instructions Manual page 76

DISPLAY CONTROL [Display]: Settings related to monitor
display and indicators
CHARA. POSITION [> Chara pos]: Set the position of text
superimposed on output from the (SUPER) CPST
connector to the monitor.
CHARA. TYPE [> Chara type]: Set the type of characters in
text superimposed on output from the (SUPER) CPST
connector to the monitor.
CHARA. VSIZE [> Chara size]: Determine the vertical size of
characters such as timecode output from the (SUPER)
CPST connector for superimposed display on the monitor.
DISPLAY INFO [> DISP info]: Select information
superimposed on output from the (SUPER) CPST
connector to the monitor.
SUB STATUS [> Sub status]: Select supplementary status
information superimposed on output from the (SUPER)
CPST connector to the monitor.
MENU DISPLAY [> Menu DISP]: Set the type of characters in
menu text superimposed on output from the (SUPER)
CPST connector to the monitor.
PEAK HOLD [> Peak hold]: Set the peak hold time for the
audio level meters.
76
Menu Contents
Description of settings
Use the M or m buttons in the menu control section to adjust
the text position while watching the monitor screen.
To return to level 1 of the setup menu, press the MENU button.
Make the following settings while watching the monitor screen.
*WHITE (WITH BKGD) [>> White]: White characters on black
background
BLACK (WITH BKGD) [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Make the selection while watching the monitor screen.
*×1 [>> ×1]: Standard size
×2 [>> ×2]: 2 times standard size
*TIME DATA & STATUS [>> Time&STA]: Time data and
operating mode indications
TIME DATA & UB [>> Time&UB]: Time data selected using
the COUNTER SELECT button, and user bit data (When
user bit data is selected using the COUNTER SELECT
button, user bit data and timecode are shown.)
TIME DATA & CNT [>> Time&CNT]: Time data selected
using the COUNTER SELECT button, and CNT value
(When CNT is selected using the COUNTER SELECT
button, CNT value and timecode are shown.)
TIME DATA & TIME[>> Time&Time]: Time data and VITC
TIME DATA ONLY [>> Time]: Time data only
REC DATE & TIME [>> REC Date]: The time data selected
with the COUNTER SELECT button is shown in the time
counter display, and the date and time of recording are
shown on the monitor screen.
*OFF [>> OFF]: Nothing of supplementary status information
EDIT PRESET [>> Edit pre]: Indications of the editing mode
settings made from the connected editing control unit
TC MODE [>> TC mode]: Indications of the operating mode of
internal timecode generator
REMAIN [>> Remain]: Remaining capacity of the tape in the
unit of minute
AUDIO MIXING [>> Aud Mix]: Indications of input audio
mixing
ALL [>> ALL]: All of the above-mentioned items of
supplementary status information
For details of supplementary status information displayed on
the monitor when a setting other than OFF is selected, see
"Displaying Supplementary Status Information" (page 30).
Make the following settings while watching the monitor screen.
*WHITE (WITH BKGD) [>> White]: White characters on black
background
BLACK (WITH BKGD) [>> Black]: Black characters on
whitebackground
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
1.5 SEC [>> 1.5 sec] to OFF [>> OFF]: Set the peak hold time
in the range of OFF (no peak hold) to 1.5 seconds in 0.1
second steps.
Factory default setting: *OFF [>> OFF]