Jabra Pro 9460 Mono Manual

Hide thumbs Also See for Pro 9460 Mono:

Download this manual

Jabra Pro 9460 Mono

How to connect my Jabra PRO 9400 / GO 6470 with Siemens

OpenStage 30,40,60,80

Prerequisite:

Jabra PRO 9460 / Jabra PRO 9470 + Jabra LINK 14201-10

In combination with one of the following phones:

Siemens OpenStage 30/40/60/80

Connection:

1. Plug the 1-sided end of the DHSG cable marked blue into the phone

socket marked with a "headset" symbol.

2. Insert the RJ9 plug of the DHSG cable into the headset base socket

marked with a "phone" symbol and the RJ45 plug into the socket

marked with "AUX".

Then follow the instructions of the Jabra PRO 9400 / Jabra GO 6470 base

SmartSetup Wizard.

Select phone settings, "Desk phone", then "Connect to a desk phone?",

"Manual".

https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707-

102/faq/6d386e88-c460-4f09-8ac6-00eb36f71030

10/06/2022 16:41

Page 1 of 3

Page 1 "phone" symbol and the RJ45 plug into the socket marked with "AUX". Then follow the instructions of the Jabra PRO 9400 / Jabra GO 6470 base SmartSetup Wizard. Select phone settings, "Desk phone", then "Connect to a desk phone?", "Manual".
Page 2 We recommend setting the microphone volume to 6 out of 13. Guided set-up: As part of the installation you can dial into the local Jabra Setup Server that takes care of configuring the audio path. Please follow the instructions shown on the display. If your Jabra Setup Server is unavailable, please contact your local Jabra support team.
Page 3 OpenStage 30/40: Menu> Audio Accessories> Headset> Cordless OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. No ringtone is transmitted for mp3 ringtones. https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707- Page 3 of 3 102/faq/6d386e88-c460-4f09-8ac6-00eb36f71030...

Go 6470Pro 9400