Disassemble Doors - Samsung RF4287HARS User Manual

Disassemble the refrigerator doors
Be careful not to drop and scratch the doors while
removing the doors.
wARning
Disassemble the refrigerator doors
1. With the door opened, remove the cap top table ( 1 ) with
a flat-blade screwdriver(-), and close the door. Remove the
3 screws holding down the top table ( 2 ) and turn it with
several wires connected.
2. Disconnect one connector ( 3 ) on the
right side door and one connector ( 4 )
on the left side door. Remove the water
line ( 5 ) while pressing the dark gray
color part ( 6 ) of the water line coupler.
If a red clip is on the coupler, it must
be removed before removing the tube.
cAution
3. Remove the 3 hex head bolts ( 7 ) attached to the upper left
and right door hinges with a socket wrench (10mm). Remove
the ground screw ( 8 ) attached to the upper left and right door
hinges with a philips screwdriver(+). Remove the upper left and
right door hinges ( 9 ).
4. Lift the door straight up to remove.
5. Remove the screw ( 10 ) attached to the lower left and right
door hinges with a philips screwdriver(+). Remove the 2 hex
head bolts ( 11 ) attached to the lower left and right door
hinges with an allen wrench (3/16"). Remove the lower left
and right door hinges ( 12 ).
10_ setting up
1
4
Red clip
(1/4")
5
6
7
9
10
2
Socket wrench
8
12
11
Allen wrench
3