Correcting Image Brightness - Casio EXILIM EX-Z35 User Manual

Correcting Image Brightness (EV Shift)
You can manually adjust an image's exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0EV to +2.0EV
• Unit: 1/3EV
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the third Control Panel option from the
bottom (EV Shift).
3.
Use [4] and [6] to adjust the exposure compensation value.
[6]: Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[4]: Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
To cancel exposure compensation, change
the EV value to 0.0.
4.
Press [SET].
This applies the exposure compensation
value. The exposure compensation value you
set remains in effect until you change it or turn
off the camera (which causes it to revert to "0.0").
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Exposure compensation value
39
Snapshot Tutorial