NANHUA FR15 Series Instructions

FR151U
FR151W/FR152W/FR153W
Installation（unit:mm）
This place can match
35MM width's aluminum rail
FR151U
FR151W/FR152W/FR153W
Shanghai Nanhua Electronics Co., Ltd
1755Wenbei Rd, Jiading district Shanghai 201802
All rights reserved by Nanhua, without the written authorization of the Nanhua, any part thereof shall not be reproduced or transmitted in any form.
FR15 series Synchronizing Control Box
Application
Design for the fault alarm output,ON/OFF and flash frequency control for aviatioon obstruction light.
Major functions&features
• Control the aviation lights flash synchronously.
• With fault alarm function. When any light fails, there will be with alarm indicator and fault signal
output.
• Alarm signal is relay contactor output, no power source.
• With photocell/manual switchover device. If you do not need photocell function, it could change to
manual control model by this device.
• Light-operated switch use PJ003 to realize its function. Fault alarm function about photocell can be
customized.
• With disturbance switching function. When lead light fails, standby light will switch on
automatically.(Customized).
Specification
Voltage
Control circuit branch
Photocell sensitivity
Ambient temperature
FR15X model
Model IP65
FR151U unsuitable
FR151W suitable
FR152W suitable
FR153W suitable
FR151U Connect
FR151U indicator light
Tel Fax
：+86 021-39126868 ：+86 021-39126868ext 808/818
DC24V~DC48V
Control method
AC110V~AC220V
4 ways Flash frequency
70~100Lux(On/Off) Alarm output
-30˚C ~ +70˚C Humidity
Lightning protection Weight
No 0.5 Kg
No 5.5 Kg
Yes 5.5 Kg
Yes 5.5 Kg
Web
：www.nanhua.com
FR15X-E1-V10
Steady burning/flash
30times/sec（adjustable）
dry connect(relay) output
10% ~ 95% (no coagulation）
Material Remark
ABS
cold rolled steel
cold rolled steel
cold rolled steel Input:DC48V,
Output:DC24V
E-mail： Add: Building 9, No.
sales@nanhua.com
1 / 2