Page 1
250 ORBITAL SANDER Operation and Safety Notes...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
Introduction Intended use ...Page 6 Features...Page 6 Delivery contents ...Page 6 Technical Data ...Page 7 General safety advice for electrical power tools 1. Workplace safety ...Page 7 2. Electrical safety ...Page 7 3. Personal safety ...Page 8 4. Careful handling and use of electrical power tools ...Page 8 Appliance-specific safety Instructions ...Page 9 Original ancillaries / and accessories...Page 10 Operation...
Sanding Pad Oscillation speed selection Grip surface Reducer Delivery contents 1 x Orbital sander PSS 250 1 x Sanding sheet (Grit 120), see Fig. F 1 x Dust collection box 1 x Reducer, see Fig. D 1 x Operating manual...
General safety advice for electrical power tools b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture.
WarNING! When sanding wood and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. Wear protective glasses and a dust mask! Ensure sufficient ventilation when work- ing on plastics, paints, lacquers, etc.
General safety advice for electrical power tools / Operation a stop before setting down the oscil- lating sander. always pull the power plug out of the socket for all work pauses, before any work on the appliance (e.g. changing the sanding paper) and when not in use.
Instructions, tips and tricks Move the oscillating sander parallel, in flat circles or alternating between lengthwise and side-to-side motions. Do not press down with the oscillating sander. The sanding pads become clogged, which reduces the sanding performance. Clean the sanding pad the vacuum cleaner.
Maintenance and cleaning / Service centre / Warranty / Disposal Maintenance and Cleaning WarNING! DaNGEr OF INJUry! Before performing any work on the appliance, disconnect the power plug. Clean the appliance regularly, preferably always immediately after use. Do not use any sharp objects for cleaning the appliance.
EC Low Voltage Directive (2006 / 95 / EC) EMC (Electromagnetic Compatibility) (2004 / 108 / EC) Type / appliance Designation: Parkside Orbital sander PSS 250 Bochum, 31.07.2009 Hans Kompernaß - Managing Director- Subject to technical changes in the course of further developments.