Changing The Quality (Data Compression Ratio) - Panasonic DMC-LC40PP Operating Instructions Manual

Changing the Quality
(Data Compression Ratio)
REC SETUP
AUDIO REC.
PICT.SIZE
QUALITY
D.ZOOM
SELECT :
SET
7
15
29
69
Approx.75 s
• In AUTO mode [
• In motion image mode [
• It may happen that pictures appear like a mosaic depending on the scene characteristics.
• The number of recordable pictures corresponds to the capacity of the supplied 16MB SD
Memory Card. (If you mix fine quality and standard quality, the number of recordable
pictures changes)
• Remaining frame which is displayed on the LCD monitor may not correspond with recorded
frames, however, this is not a malfunction.
You can choose among 3 quality levels (Data
Compression Ratio).
[Preparation]
• Set the operational mode dial and REC mode
dial. (P25)
1
2
3
EXIT
15 1
4
29 2
56 4
113 13
], you cannot select TIFF [
], quality cannot be modified.
Press the [MENU] button.
Press 3/4 to select [QUALITY].
Press 2/1 to select the quality (Data
Compression Ratio).
• : TIFF (No compression)
Suitable when editing and processing
pictures with editing/retouching software.
• : Fine (Low compression)
It gives priority to picture quality to record
high quality pictures.
• : Standard
(Standard compression)
It gives priority to the number of recordable
pictures and records standard quality
pictures.
A: Quality and number of recordable
pictures
(a Picture size, b Quality, c In motion
image mode) (With the supplied 16MB SD
Memory Card)
Press the [MENU] button.
• The menu will disappear.
].
39