Charging The Battery; Wall Mounting - Panasonic KX-TG2700 Installation Manual

Charging the battery

Place the handset on the charger and charge for
about 15 hours before initial use.
• The CHARGE indicator lights, a beep sounds and
"Charging" will be displayed.
• Recharge the battery when:
– "
Recharge battery
– " " flashes on the display, or
– the handset beeps intermittently while it is in use.
• If the battery has been discharged, the handset will
display "Charge for 15HRS" and "
place the handset on the charger. The handset will not
work. Keep charging.
Handset battery information
After your Panasonic battery is fully charged:
While in use (TALK)
While not in use (Standby)
While using the Reception Booster feature
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
Wall Mounting!
The charger can be wall mounted. Connect the AC adaptor. Install screws using
the wall template below. Mount the charger (#). Slide it down ($) then slide
down to the right (%) until it is secured.
" is displayed,
Operation
2.45 cm
⁄
( 15 ")
16
Screws
To Power
Outlet
Charge Contacts
" when you
#
– 2 –
CHARGE
Indicator
Operating time
Up to 4.5 hours
Up to 11 days
Up to 3.5 hours
$
%
Wall
Template
2.45 cm
15 ⁄
( ")
16