Motorola BLUETOOTH STEREO HEADPHONES Instruction Manual page 21

Connect Audio Cables
The provided cables allow you to connect the audio from your MP3 player to the home stereo adapter.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
Connect Power Supply to Home Stereo Adapter
1. Connect the power to the home stereo adapter using the provided power cord.
Pair the Stereo Headphones and Home Stereo Adapter
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is
easy to reconnect to the last device used after you have performed the initial pairing.
1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the
Call button for about 3 seconds until the indicator light flashes rapidly and turns off.
2. Place the stereo headphones as close as possible to the home stereo adapter (about 1 - 3 inches is
recomended).
3. On the stereo headphones, press and hold Call button for about 6 seconds until the indicator light turns on and
remains steadily lit.
21