Corner Installations Continued
Vertical Venting
5-7/8"
(19mm)
figure 5
Parallel Installations
Vertical Venting
17-1/"
(mm)
9"
(9mm)
8"
(0mm)
figure 6
INSTALL VeNT AT CLeARANCeS SPeCIfIeD bY THe VeNT
MANUfACTUReR.
NoTe: DIAGRAMS & ILLUSTRATIoNS ARe NoT To SCALe.
Horizontal Venting
5-7/8"
(19mm)
figure 7
Alcove Installations
Minimum alcove height is 41" (1041mm), minimum width is
42-1/4" (1073mm), and maximum depth is 48" (1219mm).
Note, it is quite difficult to load pellets into the hopper when
installed in an alcove only 41" (1041mm) high. For alcove
wall clearances see parallel clearances below.
" (76mm)
Top Vent
8"
(119mm)
figure 8
8"
(0mm)
-1/"
(107mm)
" (76mm)
1"
(101mm)
5