Effect Parameters; Drive/Lmt Block - Korg ToneWorks PXR4 Owner's Manual

Effect parameters

The contents of the effect parameters are explained for each effect
module. The effect modules that can be selected will differ for
each chain. ( p.82)

DRIVE/LMT BLOCK

1. DRIVE
TopBoost (TOP BOOST)
This model simulates the distortion of the VOX AC30.
1. GAIN ..................... [1...10]: Adjusts the amount of distortion.
2. LEVEL.................... [0...10]: Adjusts the output level.
3. TREBLE ................. [1...10]: Adjusts the treble (high range) tone.
4. MIDDLE ................ [1...10]: Adjusts the middle (mid range) tone.
5. BASS....................... [1...10]: Adjusts the bass (low range) tone.
US HI-G (US HI-GAIN)
This model simulates the distortion of a USA-made high-gain
amp.
* The parameters are the same as "TOP BOOST."
Brit Stk (BRIT STACK)
This model simulates the distortion of a British-made stack-
type amp.
* The parameters are the same as "TOP BOOST."
BigFuzz (BIG FUZZ)
This model simulates a standard vintage fuzz unit.
* The parameters are the same as "TOP BOOST."
Seattle (SEATTLE)
This model simulates a pedal that is ideal for the grunge rock
that originated in the Seattle area.
* The parameters are the same as "TOP BOOST."
72
Mtl Dist (METAL DIST)
This model simulates the hard distortion of the 90's.
* The parameters are the same as "TOP BOOST."
Fat Dist (FAT DIST)
This model simulates a distortion pedal with the fat distortion
of the 80's.
* The parameters are the same as "TOP BOOST."
ClasDist (CLASSIC DIST)
This model simulates the sound of a distortion pedal plus
amp distortion that was typical of the 70's.
* The parameters are the same as "TOP BOOST."
Tube OD (TUBE OD)
This model simulates the driving tube amp distortion of the
70's.
* The parameters are the same as "TOP BOOST."
ClasComp (CLASSIC COMP)
This is a compressor that makes your picking more consistent
and produces a smooth sustain.
If the sound is distorted, slightly lower each of the LEVEL,
TREBLE, MIDDLE, and BASS settings.
1. SENS ....................... [1...10]: Adjusts the sensitivity of the compres-
sor.
2. LEVEL .................... [0...10]: Adjusts the output level.
3. TREBLE .................. [1...10]: Adjusts the treble (high range) tone.
4. MIDDLE.................[1...10]: Adjusts the middle (mid range) tone.
5. BASS ....................... [1...10]: Adjusts the bass (low range) tone.
Acoustic (ACOUSTIC)
When you use the pickup closest to the neck of your guitar,
this produces a realistic simulation of an acoustic guitar.
It contains a compressor with adjustable sensitivity.