P6. Usb Comm: Usb Connections; Effect; P1. Effect: Effect Settings; Selecteffect: Select An Effect Program - Korg ToneWorks PXR4 Owner's Manual

Digital recording studio
Table of Contents

Advertisement

Parameters
1.S: Delete only the undo data of the currently selected
song.
ALL: Delete the undo data of all songs.

P6. USB comm: USB connections

When connecting the PXR4 to your computer, make set-
tings in this page. ( p.52)

EFFECT

Here you can select effect settings. For an effect, you can
select either GUITAR, INSERT, MASTER, or FINAL as the
effect assign (insert location). ( p.67: "EFFECT ASSIGN")
An effect program consists of up to eight effect modules
together. You can edit an effect program in various ways,
such as by switching each effect module on/off and edit-
ing its settings. Edited effect programs can be saved in the
user area. ( p.40)
The number of effect pages and their contents will differ
depending on the type of effect. The effect will not be dis-
played if the effect assign setting is "Off."
When an effect page is selected, the [TRACK] faders 1–4 and
the master fader are used to edit effect parameters. The fad-
ers that control parameters will be indicated in the display.
When you are in an effect page, the "REC SELECT" record
select keys will select the effect to be edited. By repeatedly
pressing the same key, you can switch the corresponding
effect on/off.
64

P1. Effect: Effect settings

P.1-1 SelectEffect: Select an effect program
1. SelectEffect: ......................[00...49
*1: When ASSIGN=GUITAR. *2: When ASSIGN=INSERT,
MASTER, FINAL.
This selects the effect program. The effects that can be
selected will depend on the insert location. For the effects
available for each insert location, refer to "Effect Program
List" ( p.81). Numbers preceded by a "U" (e.g., "U00")
are user area programs in which you can store effect pro-
grams that you yourself created.
P.1-2 Drive/LMT: Drive/LMT module
***: This depends on the effect.
1. Drive/LMT ................................................................. [***]
Select the type of drive or amp simulator.
1a. (Parameter 1)....................................................... [***]
This can also be edited by [TRACK] fader 1.
1b. (Parameter 2)....................................................... [***]
This can also be edited by [TRACK] fader 2.
1c. (Parameter 3) ....................................................... [***]
This can also be edited by [TRACK] fader 3.
1d. (Parameter 4)....................................................... [***]
This can also be edited by [TRACK] fader 4.
1e. (Parameter 5) ....................................................... [***]
This can also be edited by the [MASTER] fader.
*1
*2
/50...99
, U00...99]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents