Delete Track - Deleting A Track - Korg ToneWorks PXR4 Owner's Manual

In
Blank
As an example, here's how to erase the In–Out region of
track 1.
Register marks at the desired In and Out time loca-
1
tions. ( p.35)
Display the "EditTrk" (track edit) page. ( Copy
2
Track 2 )
Select "ErsTrack" (erase track).
3
Select "ErsTrack." Then press the [CURSOR] right key.
Select the "DestTrk."
4
Use the dial to select the track number that you want
to erase. For this example, select track "1." Then press
the [CURSOR] right key.
Select the "EditMode." ( Copy Track)
5
Select the "InTime" and "OutTime."
6
For each point, use the dial to select a mark number
that you registered. Then press the [CURSOR] right
key.
By pressing the [CURSOR] down key, you can edit the time
location of the selected mark. You can also press the [PLAY]
key to play back the sound for approximately two seconds
from the selected time location.
Out DestTrk
DestTrk
Execute the operation.
7
When the display asks "ErsOK?," press the [CURSOR]
right key to execute the operation. When the data has
been erased, the display will indicate "Finish!"
Press the [PLAY] key to play back, and verify that the
8
operation occurred as you intended.
You can press the [UNDO] key to return to the state prior to
executing. ( p.21)
Delete Track – deleting a track
This operation deletes the specified region (In–Out) of the
recorded track data. When data is deleted, the data fol-
lowing the deleted region (i.e., the data following the Out
location) will be moved forward.
In Out
Here's how to delete the In–Out region of track 1.
Register marks at the desired In and Out time loca-
1
tions. ( p.35)
Display the "EditTrk" (track edit) page. ( Copy
2
Track 2 )
Select "DelTrack" (delete track).
3
Select "DelTrack." Then press the [CURSOR] right key.
Operation
DestTrk
DestTrk
47