Table of Contents
Advertisement
3. Turning the power off
Make sure that operations such as song playback or
recording are completed, and turn off the power by fol-
lowing the power-on procedure in reverse.
Before you power-off, you must press the [STOP] key to save
the song to the card.
Turn the volume of all connected devices to the minimum
setting, and turn off each power switch in order, beginning
with the last device that receives the audio signal.
Never turn off the power when the card access icon is dis-
played. Doing so will destroy not only the selected song, but
may also destroy the songs on the card as well as the Smart-
Media itself.
Listening to the demo songs
The included card contains demo songs. Here's how you
can listen to these demo songs.
Connect headphones or a monitor amp to the PXR4.
1
Make connections as described on p.12.
Turn on the power of the PXR4. ( p.13)
2
Set the [TRACK] fader of
3
the PXR4 to 8, and the
[MASTER] fader to 0.
Select the song that you
4
want to play back.
( p.23: Step 2 "2. Selecting
a different song")
If a "
" symbol is displayed at a track number in
5
the display, press the corresponding [REC SELECT]
key so that only the number is shown.
Press the [PLAY] key to begin playback.
6
Slowly raise the [MASTER] fader to
7
adjust the volume level.
If you are using headphones, raise the
[MASTER] fader to about 6, and then use the [PHONE
LEVEL] knob to make adjustments.
When the demo song has finished playing, press the
8
[STOP] key to stop playback.
Demo song list
"Duck Teeth"
Written and performed by "The DM Project"
The DM Project
Ryan Rhodes — guitars
Justin Hosman — bass
Joe Kirsch — drums
© 2001 The DM Project-all rights reserved.
"SHINY METAL OBJECTS"
Written and performed by Mumbo Jumbo Band
© 1999 Mumbo Jumbo Band-all rights reserved.
Introduction
15
Hide quick links:
Advertisement
Table of Contents
