Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Dangerous electric current –...
Introduction / Safety Hot air gun PHLG 2000 SE For removing, reshaping, preheating, defrosting etc. Introduction For your safety Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly.
Let the device cool down completely before you put it into storage. Always place your heat gun down on its end, with the nozzle pointing upwards (see Fig. D). Handling the device correctly: If danger arises, pull the mains plug immediately out of the mains socket.
Operation Caution! When using the device, never allow the ventilation slots to be covered. Switching on the device: Press the ON / OFF switch or „II“. Switching off the device: Press the ON / OFF switch Setting the air flow and temperature: The ON / OFF switch has two different air flow settings.
Removing weeds: The hot air dries out the weeds and micro-organisms. Lighting barbecue charcoal: Charcoal ignites in a few minutes. Wax removal: You can remove wax residues from skis / snow- board or from candle holders. Use the amount of care appropriate to the product. Cleaning Before carrying out any tasks on the device itself, pull the plug from the mains socket.