Playing External Disc - Kenwood KDC-3022 Instruction Manual

CD/MP3/External disc control features
Playing CD & MP3
When there is no disc inserted
1
Drop open the faceplate
Press the Release button.
2
Insert a disc.
3
Press the faceplate on the left side, and return it to its former
position.
• When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an appropriate
action, then operate the unit.
• Do not use the unit with the faceplate in the open condition. If it's
used in the open position dust can enter the inside part and cause
damage.
• The models that can play MP3 are shown below.
KDC-X569/ MP522/ MPV622/ MPV6022
• When a disc is inserted, the "IN" indicator is ON.
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and plays.
Eject the disc
1
Drop open the faceplate
Press the Release button.
2
Eject the disc
Press the [0] button.
3
Press the faceplate on the left side, and return it to its former
position.
3 in. (8cm) disc can't be played. Using an adapter and inserting them
into this unit can cause damage.
The MP3 media that this unit can play are CD-ROM, CD-R, and CD-
RW.
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or
Romeo. The methods and precautions to be followed for writing
MP3 data are covered in <Notes on playing MP3> (page 6).
Check that section before creating your MP3 media.

Playing External Disc

Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display
"CD2"
"DISC CH"
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and plays.
— 18 —
Disc player
CD player
CD changer/ MD changer