JVC InteriArt LT-32A60BU Instructions Manual

Wide lcd panel tv
Hide thumbs Also See for InteriArt LT-32A60BU:
Table of Contents

Advertisement

LT-32A60BU
LT-32A60SU
LT-26A60BU
LT-26A60SU
WIDE LCD PANEL TV
16:9 LCD TV
TELEVISEUR A ECRAN LCD PANORAMIQUE
BREEDBEELD LCD TV
TELEVISOR CON PANEL LCD PANORÁMICO
TV LCD WIDESCREEN
TELEVISOR COM ECRÃ PANORÂMICO DE
CRISTAL LÍQUIDO
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ITALIANO
PORTUGUÊS
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
ISTRUZIONI
INSTRUÇÕES

Advertisement

Table of Contents
loading

Summary of Contents for JVC InteriArt LT-32A60BU

  • Page 1 LT-32A60BU LT-32A60SU LT-26A60BU LT-26A60SU WIDE LCD PANEL TV 16:9 LCD TV TELEVISEUR A ECRAN LCD PANORAMIQUE BREEDBEELD LCD TV TELEVISOR CON PANEL LCD PANORÁMICO TV LCD WIDESCREEN TELEVISOR COM ECRÃ PANORÂMICO DE CRISTAL LÍQUIDO ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS...
  • Page 2 Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
  • Page 3: Cleaning The Screen

    Failure to take the following precautions may cause damage to the television or remote control. DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV.
  • Page 4: Table Of Contents

    Information function ... 16 ZOOM function... 17 3D SOUND function... 18 Return to TV channel instantly... 18 Favourite channel function... 19 Operating a JVC brand VCR or DVD player... 20 Teletext function ...21 Basic operation ... 21 Using the List Mode ... 21 Hold...
  • Page 5: Setting Up Your Tv

    Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer.
  • Page 6: Removing The Terminal Cover

    Setting up your TV Removing the terminal cover There are connection terminals behind the cover on the rear of the TV. Remove the cover before connecting an antenna or VCR. Remove the cover by removing the hooks. When replacing the cover, place the side of the cover against the TV and insert the hooks.
  • Page 7: Connecting The Aerial And Video Cassette Recorder (Vcr)

    Setting up your TV Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. Caution • Turn off all the equipment including the TV before connecting anything. If you are connecting a VCR, follow A →...
  • Page 8: Connecting The Power Cord To The Ac Outlet

    When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings. 1 Make sure to set the VCR/TV/DVD...
  • Page 9 Setting up your TV • If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu”...
  • Page 10 7 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV RECORDING DEVICE EXIT D0005 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
  • Page 11: T-V Link Functions

    To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier.
  • Page 12 Pre-set download The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.
  • Page 13: Tv Buttons And Functions

    TV buttons and functions Refer to the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (page 7) 3 TV/AV button (page 12) 4 MENU/OK button (pages 13, 24) 5 P p buttons (page 12) 6 r (Volume) q buttons (page 13) 7 A (Stand by) button (page 12) 8 Headphone jack (mini jack) (page 41) Turn the TV on from standby...
  • Page 14: Adjust The Volume

    Adjust the volume Press the r (Volume) q buttons The volume level indicator appears. Using the Menu Use the MENU/OK button Refer to “Using the TV’s menu” (see page 24) for details of using the menu. TV buttons and functions...
  • Page 15: Remote Control Buttons And Functions

    Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 i button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = d (Favourite) button ~ # (Standby) button ! VCR/TV/DVD switch...
  • Page 16: Choose A Tv Channel And Watch Images From External Devices

    Choose a TV channel and watch images from external devices Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the p p buttons: Press the p p buttons to choose the programme number...
  • Page 17: Adjust The Volume

    Remote control buttons and functions Adjust the volume Press the r q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the r q buttons. Muting the sound Press the l (muting) button to turn off the sound.
  • Page 18: Zoom Function

    ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. • The ZOOM mode is fixed at FULL when you are using the TV as a PC screen. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the...
  • Page 19: 3D Sound Function

    Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears.
  • Page 20: Favourite Channel Function

    Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4. Favourite channel registration 1 In the normal screen, choose a TV channel (PR 1 –...
  • Page 21: Operating A Jvc Brand Vcr Or Dvd Player

    2 Press the VCR/DVD Control Button to control your VCR or DVD player • If your device is not made by JVC, these buttons will not work. • Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.
  • Page 22: Teletext Function

    Teletext function Basic operation 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position 3 Press g (Text) button to display the teletext Pressing g (Text) button changes the mode as follows: TV mode 4 Choose a teletext page by pressing the p p buttons, number buttons...
  • Page 23: Hold

    Teletext function 2 Press a colour button to choose a position. Then press the number buttons to enter the page number 3 Press and hold down the A (Store) button The four page numbers blink white to show that they are stored in memory. To call up a stored page: 1 Press the B button to enter the List mode...
  • Page 24: Index

    Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page.
  • Page 25: Using The Tv's Menu

    Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the H button to display the menu bar D0105-EN...
  • Page 26: Picture Menu

    PICTURE menu PICTURE PICTURE PICTURE MODE BRIGHT-1 CONTRAST BRIGHT-2 SHARP COLOUR COLOUR TEMP. FEATURES D0014 • While the PICTURE menu is displayed, pressing the blue button will set the BRIGHT-1, CONTRAST, BRIGHT-2, SHARP, COLOUR, HUE settings to their default settings. •...
  • Page 27: Features

    PICTURE menu COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. NORMAL: The normal white colour. WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.
  • Page 28 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button >> 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM...
  • Page 29: Sound Menu

    SOUND menu SOUND STEREO/ BASS TREBLE BALANCE 3D SOUND D0019 • When the headphones are connected, only “STEREO / I • II” can be used. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
  • Page 30: Features Menu

    FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears.
  • Page 31: Appearance

    FEATURES menu 4 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen.
  • Page 32: Favourite Setting

    FAVOURITE SETTING Chose when deleting the favourite channels registered in the buttons 1 to 4. 1 Choose FAVOURITE SETTING, then press the a or 3 button The FAVOURITE SETTING menu appears. FAVOURITE SETTING PR 07 PR 01 PR 01 PR 01 D0112-EN 2 Press the 6 buttons and chose the favourite channel that you want...
  • Page 33: Set Up Menu

    SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE DECODER(EXT-2) EXT SETTING D0029 AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 7). 1 Choose AUTO PROGRAM, then press the a or 3 button The COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function.
  • Page 34 • Using the MANUAL function for a TV channel for which the DECODER (EXT-2) function has been set to ON returns the setting of the DECODER (EXT-2) function for that channel to OFF. • When a TV channel has already been registered in PR 99, using the INSERT function deletes that TV channel.
  • Page 35 SET UP menu 1 Press the 6 buttons to choose a TV channel 2 Press the red button to start the ID function > EDIT BBC1 D0031-EN 3 Press the 6 buttons to choose a character > EDIT BBC1 D0032-EN 4 Press the 5 buttons to move the cursor 5 Repeat steps 3 and 4 to complete...
  • Page 36 INSERT 1 Press the 6 buttons to choose a programme number (PR) for which you will register a new TV channel 2 Press the green button and start the INSERT function > EDIT CH/CC BBC1 CH/CC D0034-EN To cancel the INSERT function: Press the b button.
  • Page 37: Language

    SET UP menu 4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine-...
  • Page 38: Ext Setting

    6 Turn on the VCR, and then press the a button to transmit the data to VCR The T-V LINK menu disappears once the data transmission ends. If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following: •...
  • Page 39 SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal > EXT SETTING EXT-1 EXT-3 D0020-EN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed.
  • Page 40 • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. • When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected...
  • Page 41: Displaying A Computer Screen

    Displaying a computer screen This TV can be used as a computer screen. Connecting to the computer Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the EXT-3 L/R terminal to the computer’s sound output terminal.
  • Page 42: Additional Preparation

    Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram.
  • Page 43 Additional preparation without terminal covers...
  • Page 44: Connecting Headphones

    Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal other than EXT-1/EXT-4. You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)”...
  • Page 45: Ch/Cc Numbers

    CH/CC numbers When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel CH 02 / CH 202 E2, R1 CH 03 / CH 203 E3, ITALY A CH 04 / CH 204 E4, ITALY B, R2...
  • Page 46 • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
  • Page 47: Troubleshooting

    Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
  • Page 48 • Videotaping teletext is not recommended because it may not record correctly. • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal.
  • Page 49 Troubleshooting • The top of the TV and the screen may become hot during use but this has no affect on the performance of the TV. Make sure that the ventilation holes are not blocked. • When the picture is unstable, the screen may become white for a moment.
  • Page 50: Specifications

    Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this would be an infringement of copyright. LT-32A60BU/LT-32A60SU...
  • Page 51 Specifications Model Broadcasting systems Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Power requirements Power consumption Screen size Audio output Speakers EXT-1 terminal EXT-2 terminal EXT-3 terminal EXT-4 terminal PC INPUT terminal Headphone jack Dimensions (W × H × D) Weight Accessories We may change the design and specifications without notice.
  • Page 52 LCT1860-001B-U © 2005 Victor Company of Japan, Limited 0405TKH-CR-MU...
  • Page 53 LT-32A60SJ LT-26A60SJ WIDE LCD PANEL TV INSTRUCTIONS...
  • Page 54 Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
  • Page 55 Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
  • Page 56 Failure to take the following precautions may cause damage to the television or remote control. DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV.
  • Page 57 Information function ... 16 ZOOM function... 17 3D SOUND function... 18 Return to TV channel instantly... 18 Favourite channel function... 19 Operating a JVC brand VCR or DVD player... 20 Teletext function ...21 Basic operation ... 21 Using the List Mode ... 21 Hold...
  • Page 58: Setting Up Your Tv

    Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer.
  • Page 59: Removing The Terminal Cover

    Setting up your TV Removing the terminal cover There are connection terminals behind the cover on the rear of the TV. Remove the cover before connecting an antenna or VCR. Remove the cover by removing the hooks. When replacing the cover, place the side of the cover against the TV and insert the hooks.
  • Page 60: Connecting The Aerial And Video Cassette Recorder (Vcr)

    Setting up your TV Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. Caution • Turn off all the equipment including the TV before connecting anything. If you are connecting a VCR, follow A →...
  • Page 61: Connecting The Power Cord To The Ac Outlet

    When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings. 1 Make sure to set the VCR/TV/DVD...
  • Page 62 Setting up your TV • If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu”...
  • Page 63 7 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV RECORDING DEVICE EXIT D0005 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
  • Page 64: T-V Link Functions

    To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier.
  • Page 65 Pre-set download The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.
  • Page 66: Tv Buttons And Functions

    TV buttons and functions Refer to the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (page 7) 3 TV/AV button (page 12) 4 MENU/OK button (pages 13, 24) 5 P p buttons (page 12) 6 r (Volume) q buttons (page 13) 7 A (Stand by) button (page 12) 8 Headphone jack (mini jack) (page 41) Turn the TV on from standby...
  • Page 67: Adjust The Volume

    Adjust the volume Press the r (Volume) q buttons The volume level indicator appears. Using the Menu Use the MENU/OK button Refer to “Using the TV’s menu” (see page 24) for details of using the menu. TV buttons and functions...
  • Page 68: Remote Control Buttons And Functions

    Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 i button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = d (Favourite) button ~ # (Standby) button ! VCR/TV/DVD switch...
  • Page 69: Choose A Tv Channel And Watch Images From External Devices

    Choose a TV channel and watch images from external devices Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the p p buttons: Press the p p buttons to choose the programme number...
  • Page 70: Adjust The Volume

    Remote control buttons and functions Adjust the volume Press the r q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the r q buttons. Muting the sound Press the l (muting) button to turn off the sound.
  • Page 71: Zoom Function

    ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. • The ZOOM mode is fixed at FULL when you are using the TV as a PC screen. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the...
  • Page 72: 3D Sound Function

    Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears.
  • Page 73: Favourite Channel Function

    Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4. Favourite channel registration 1 In the normal screen, choose a TV channel (PR 1 –...
  • Page 74: Operating A Jvc Brand Vcr Or Dvd Player

    2 Press the VCR/DVD Control Button to control your VCR or DVD player • If your device is not made by JVC, these buttons will not work. • Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.
  • Page 75: Teletext Function

    Teletext function Basic operation 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD switch to the TV position 3 Press g (Text) button to display the teletext Pressing g (Text) button changes the mode as follows: TV mode 4 Choose a teletext page by pressing the p p buttons, number buttons...
  • Page 76: Hold

    Teletext function 2 Press a colour button to choose a position. Then press the number buttons to enter the page number 3 Press and hold down the A (Store) button The four page numbers blink white to show that they are stored in memory. To call up a stored page: 1 Press the B button to enter the List mode...
  • Page 77: Index

    Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page.
  • Page 78: Using The Tv's Menu

    Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the H button to display the menu bar D0105-EN...
  • Page 79: Picture Menu

    PICTURE menu PICTURE PICTURE PICTURE MODE BRIGHT-1 CONTRAST BRIGHT-2 SHARP COLOUR COLOUR TEMP. FEATURES D0014 • While the PICTURE menu is displayed, pressing the blue button will set the BRIGHT-1, CONTRAST, BRIGHT-2, SHARP, COLOUR, HUE settings to their default settings. •...
  • Page 80: Features

    PICTURE menu COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. NORMAL: The normal white colour. WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.
  • Page 81 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button >> 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM...
  • Page 82: Sound Menu

    SOUND menu SOUND STEREO/ BASS TREBLE BALANCE 3D SOUND D0019 • When the headphones are connected, only “STEREO / I • II” can be used. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
  • Page 83: Features Menu

    FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears.
  • Page 84: Appearance

    FEATURES menu 4 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen.
  • Page 85: Favourite Setting

    FAVOURITE SETTING Chose when deleting the favourite channels registered in the buttons 1 to 4. 1 Choose FAVOURITE SETTING, then press the a or 3 button The FAVOURITE SETTING menu appears. FAVOURITE SETTING PR 07 PR 01 PR 01 PR 01 D0112-EN 2 Press the 6 buttons and chose the favourite channel that you want...
  • Page 86: Set Up Menu

    SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE DECODER(EXT-2) EXT SETTING D0029 AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 7). 1 Choose AUTO PROGRAM, then press the a or 3 button The COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function.
  • Page 87 • Using the MANUAL function for a TV channel for which the DECODER (EXT-2) function has been set to ON returns the setting of the DECODER (EXT-2) function for that channel to OFF. • When a TV channel has already been registered in PR 99, using the INSERT function deletes that TV channel.
  • Page 88 SET UP menu 1 Press the 6 buttons to choose a TV channel 2 Press the red button to start the ID function > EDIT BBC1 D0031-EN 3 Press the 6 buttons to choose a character > EDIT BBC1 D0032-EN 4 Press the 5 buttons to move the cursor 5 Repeat steps 3 and 4 to complete...
  • Page 89 INSERT 1 Press the 6 buttons to choose a programme number (PR) for which you will register a new TV channel 2 Press the green button and start the INSERT function > EDIT CH/CC BBC1 CH/CC D0034-EN To cancel the INSERT function: Press the b button.
  • Page 90: Language

    SET UP menu 4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine-...
  • Page 91: Ext Setting

    6 Turn on the VCR, and then press the a button to transmit the data to VCR The T-V LINK menu disappears once the data transmission ends. If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following: •...
  • Page 92 SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal > EXT SETTING EXT-1 EXT-3 D0020-EN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed.
  • Page 93 • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. • When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected...
  • Page 94: Displaying A Computer Screen

    Displaying a computer screen This TV can be used as a computer screen. Connecting to the computer Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the EXT-3 L/R terminal to the computer’s sound output terminal.
  • Page 95: Additional Preparation

    Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram.
  • Page 96 Additional preparation without terminal covers...
  • Page 97 Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal other than EXT-1/EXT-4. You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)”...
  • Page 98: Ch/Cc Numbers

    CH/CC numbers When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel CH 02 / CH 202 E2, R1 CH 03 / CH 203 E3, ITALY A CH 04 / CH 204 E4, ITALY B, R2...
  • Page 99 • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
  • Page 100: Troubleshooting

    Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
  • Page 101 • Videotaping teletext is not recommended because it may not record correctly. • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal.
  • Page 102 Troubleshooting • The top of the TV and the screen may become hot during use but this has no affect on the performance of the TV. Make sure that the ventilation holes are not blocked. • When the picture is unstable, the screen may become white for a moment.
  • Page 103: Specifications

    Specifications Model Broadcasting systems CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies F2-F10, F21-F69, 116-172, E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, A-H, H+1, H+2, R1-R12, R21-R69 •...
  • Page 104 Specifications Model Broadcasting systems Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Power requirements Power consumption Screen size Audio output Speakers EXT-1 terminal EXT-2 terminal EXT-3 terminal EXT-4 terminal PC INPUT terminal Headphone jack Dimensions (W × H × D) Weight Accessories We may change the design and specifications without notice.
  • Page 105 LCT1863-001B-U © 2005 Victor Company of Japan, Limited 0405TKH-CR-MU...

Table of Contents