Intel LGA775 User Manual page 36

BIOS SETUP
Time
The time format is:
To set the time, highlight the "Time" field and use the <PgUp>/ <PgDn>
or +/- keys to set the current time.
IDE Primary HDDs / IDE Secondary HDDs
The onboard PCI IDE connectors provide Primary and Secondary
channels for connecting up to four IDE hard disks or other IDE devices.
Each channel can support up to two hard disks; the first is the "Master"
and the second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select 'Manual' to define the drive information
manually. You will be asked to enter the following items.
Capacity :
Cylinder :
Head :
Precomp :
Landing Zone : Landing zone
Sector :
The Access Mode selections are as follows:
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
360KB
5.25 in.
32
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
Capacity/size of the hard disk drive
Number of cylinders
Number of read/write heads
Write precompensation
Number of sectors
CHS
LBA
Large (for MS-DOS only)
Auto
1.2MB 720KB
5.25 in. 3.5 in.
2801550 User's Manual
(HD > 528MB and supports
Logical Block Addressing)
1.44MB 2.88MB
3.5 in. 3.5 in.