Sonar; Sonar Views - Garmin GPSMAP 740 Owner's Manual

When connected to a transducer, the following 700 series models can be used as fishfinders:
• GPSMAP 720s
• GPSMAP 740s
• GPSMAP 750s

Sonar Views

The chartplotter shows sonar data using three different views: a full-screen view, a split-zoom view, and a
split-frequency view.
Full-screen Sonar View
The full-screen sonar view shows a full-view graph of sonar readings from a transducer. The range scale along
the right side of the screen shows the depth of detected objects as the screen scrolls from the right to the left.
From the Home screen, select Sonar > Full Screen.
➋
➌
➍
➏
➐
Range adjustment buttons
➊
Suspended target
➌
Range
➎
Transducer frequency
➐
Setting the Zoom Level on the Full-screen View
You can zoom in to a section of the full-screen sonar view.
1. From the Home screen, select Sonar > Full Screen > Menu > Zoom.
2. Complete an action:
• Select 2x Auto Zoom to zoom in on the sonar data at two-times magnification.
• Select 4x Auto Zoom to zoom in on the sonar data at four-times magnification.
• Select Manual Zoom to set the depth range of the magnified area manually. Select View Up or
View Down to set the depth range of the magnified area, select Zoom In or Zoom out to increase or
decrease the magnification of the magnified area, and select Done.
• Select Bottom Lock to zoom in on sonar data from the bottom depth, select Up or Down to set the
depth range of the magnified area, and select Done.
GPSMAP 700 Series Owner's Manual

Sonar

➊
Full-screen Sonar View
Depth, water speed, and unit voltage
➋
Bottom
➍
GPS speed and GPS heading
➏
Sonar
➎
71