Radar; Transmitting Radar Signals; Adjusting The Zoom Scale On The Radar Screen - Garmin GPSMAP 740 Owner's Manual

Garmin chartplotter owner's manual
Hide thumbs Also See for GPSMAP 740:
Table of Contents

Advertisement

Radar

The marine radar transmits microwave energy that has the potential to be harmful to humans and animals.
Before beginning radar transmission, verify that the area around the radar is clear. The radar transmits a beam
approximately 12° above and below a line extending horizontally from the center of the radar. Avoid looking
directly at the radar, because the eyes are the most-susceptible parts of the body.
When you connect your chartplotter to an optional Garmin marine radar such as a GMR
18/24, you can view more information about your surroundings.
The GMR transmits a narrow beam of microwave energy as it rotates in a 360° pattern. When the transmitted
energy contacts a target, some of that energy is reflected back to the radar.

Transmitting Radar Signals

1. With the chartplotter off, connect your radar as described in the radar installation instructions.
2. Turn on the chartplotter.
The radar warms up and a countdown is provided to alert you when the radar is ready.
NoTe: As a safety feature, the radar enters standby mode after it warms up. This gives you an opportunity
to verify that the area around the radar is clear before beginning radar transmission.
3. From the Home screen, select Radar.
4. Select Cruising, Harbor, offshore, or Sentry.
A countdown message appears while the radar is starting up, and the "Ready to Transmit" message appears.
5. Select Transmit.
A "Spinning Up" message appears for a few moments, and the radar begins painting an image.
Stopping the Transmission of Radar Signals
From the Radar screen, select To Standby.
Transmitting Radar Signals from any Screen
1. Press and release
2. Complete an action:
• Select Transmit Radar.
• Select Radar to Standby.

Adjusting the Zoom Scale on the Radar Screen

The zoom scale, also called the radar range, represents the distance from your position (the center) to the
outermost ring. Each ring represents an even division of the zoom scale. For example, if the zoom scale is set
at three miles, each ring represents one mile from the center out.
Touch
and
54
to open the display screen.
to zoom out and zoom in.
Radar
WARNING
404/406 or a GMR
GPSMAP 700 Series Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents