Mounting; Control Unit - Furuno FS-1570 Installation Manual

1.1

Control Unit

1.1.1 Mounting methods
The control unit can be mounted one of four ways;
•
In the hanger (overhead, bulkhead or tabletop)
•
Flush mounting.
1.1.2 Mounting considerations
•
Make sure the location is strong enough to support the unit under the conditions of
continued vibration and shock normally encountered on the boat
•
Locate the unit where it is easily accessible and does not interfere with personnel or
operation of other equipment; for example, ship's wheel.
1.1.3 Hanger mounting
1. Fix the hanger with tapping screws (supplied).
2. Set the control unit to the hanger and fix it with the washers and knobs.
4-φ5
Fixing hole
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to coating or plastic
parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.
220+0.5
298+4
RT DSC TEST
DISTRESS 1 2 3
CH ABC DEF
4 IntCom ACK/SQ SCAN
5 6
GHI JKL MNO
PUSH TO ENTER
ALARM
PRINT
CANCEL 7 8 9
PQRS TUV WXYZ
FILE 0 LOG SETUP
CALL #
CURSOR TUNE
PWR/VOL
OFF

1. MOUNTING

20
OVEN
18
110
93
70
10
1-1