Download Print this page
Extron electronics Network Device HSA 200 Specifications
Extron electronics Network Device HSA 200 Specifications

Extron electronics Network Device HSA 200 Specifications

Extron electronics network device specification sheet

Advertisement

Quick Links

Specifications — HSA 200 Series, HSA 222 Series
Video— HSA 200SE, HSA 200CE
Gain ������������������������������������������������� 0 dB, 0�6 dB, 1�2 dB, selectable (when input is 0�7 Vp-p, output is 0�7 V, 0�75
Bandwidth �������������������������������������� 300 MHz (-3 dB)
N ID bits are terminated on pins 4 and 11.
Video input— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video
Connectors ������������������������������������� (1) 15-pin HD female
Video input— HSA 200SE, HSA 200
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video
Connectors ������������������������������������� (1) 15-pin HD female
Nominal level �������������������������������� 1�0 Vp-p for Y of component video
Minimum/maximum levels �������� Analog: 0�3 V to 1�5 Vp-p with no offset at unity gain
Impedance �������������������������������������� 75 ohms
Horizontal frequency �������������������� 15 kHz to 135 kHz
Vertical frequency �������������������������� 30 Hz to 170 Hz
Input coupling ������������������������������� DC
Video output— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 pass-through VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV
Connectors ������������������������������������� 5 BNC female on pigtails
Video outputHSA 200SE, HSA 200CE
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video
Connectors ������������������������������������� 5 BNC female on pigtails
Nominal level �������������������������������� 1�0 Vp-p for Y of component video
Minimum/maximum levels �������� Analog: 0�3 V to 1�5 Vp-p
Impedance �������������������������������������� 75 ohms
DC offset ����������������������������������������� ±5 mV with input at 0 offset
Return loss �������������������������������������� <-35 dB @ 5 MHz
N Output resolution may vary depending on whether or not the Extender is attached to the computer
at startup, and also on the type of computer being used.
Sync— HSA 200SE, HSA 200CE
Input type ��������������������������������������� RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync
Output type ������������������������������������ RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync
Input level �������������������������������������� 2�0 V to 5�0 Vp-p
Output level ����������������������������������� TTL: 5�0 Vp-p, unterminated
Input impedance ��������������������������� 510 ohms
Output impedance ������������������������ 75 ohms
Max� propagation delay ��������������� 18�8 ns
Max� rise/fall time ������������������������ 4 ns
Polarity�������������������������������������������� Positive or negative (follows input)
Extron HSA 200S, HSA 200SE, HSA 200C, HSA 200CE, HSA 222S, HSA 222C • Specifications
V, 0�8 Vp-p)
0�7 Vp-p for RGB and for R-Y and B-Y of component video
component video
0�7 Vp-p for RGB and for R-Y and B-Y of component video
1

Advertisement

loading

Summary of Contents for Extron electronics Network Device HSA 200

  • Page 1 Specifications — HSA 200 Series, HSA 222 Series Video— HSA 200SE, HSA 200CE Gain ������������������������������������������������� 0 dB, 0�6 dB, 1�2 dB, selectable (when input is 0�7 Vp-p, output is 0�7 V, 0�75 V, 0�8 Vp-p) Bandwidth �������������������������������������� 300 MHz (-3 dB) N ID bits are terminated on pins 4 and 11.
  • Page 2 Specifications — HSA 200 Series, HSA 222 Series, cont’d Audio— HSA 200SE, HSA 200CE Gain ������������������������������������������������� Unbalanced output: 0 dB; balanced output: +6 dB Frequency response ���������������������� 20 Hz to 20 kHz, ±0�5 dB THD + Noise ���������������������������������� 0�025% @ 1 kHz, 0�020% @ 20 kHz at nominal level S/N ��������������������������������������������������...
  • Page 3 Enclosure dimensions Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit's connector access side is underlined. Extron is not responsible for miscut mounting holes.
  • Page 4 Specifications — HSA 200 Series, HSA 222 Series, cont’d HSA 222S — international square models Top plate (outer rim) � 8�183" W x 6�375" D (20�78 cm W x 16�19 cm D) Surface cutout (inside rim) Top plate (inside tilt plate) HSA 200C/HSA 200CE —...

This manual is also suitable for:

Hsa 222 seriesHsa 200sHsa 200seHsa 200cHsa 222sHsa 222c ... Show all