DST-HD1100E
⑦
Left/Right ANALOG-AUDIO OUTPUTS(with Analog Video Output)
Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these
terminals when you use analog for video.
⑧
DTV OUT COMPONENT (Y, P
Connect to the Y-P
-P
digital video input of a digital compatible TV set (or the Y-P
B
R
video component).
⑨
SPDIF Output(Coaxial)
Connect this terminal to the digital audio input of a TV set.
⑩
SPDIF Output(Fiber optic connector)
Connect this terminal to the digital audio input of a TV set (i.e., to a TV set that has a fiber-optic connector
for digital audio). Or, connect this terminal to the digital audio input of a separate component (i.e., Dolby
Digital-AMP..).
⑪
PC Monitor Output (R,G,B FORMAT)
Connect to the R, G, B inputs of a TV set, computer monitor, or some other video component.
⑫
Upgrade Port (RS232C)
It is used for firmware upgrade. DO NOT USE THIS PORT AT ANY TIME!
⑬
Power Switch
Press the switch to turn the power on or off
, P
format)
B
R
HDTV DIGITAL RECEIVER
-P
inputs of some other
B
R
6