Register Your Cellular Phone (Pairing); Select The Cellular Phone - Clarion NX501 Owner's Manual & Installation Manual

2-din dvd multimedia station with built-in navigation & 6.2" touch panel control
Hide thumbs Also See for NX501:
Table of Contents

Advertisement

to set the function ON or OFF.
Selecting Microphone
You can select the microphone to be used.
• The factory default setting is “Internal”. Touch the
[
] or [
] key of the Microphone Select
item to set the function.
Setting Microphone Gain
You can adjust the input level of the microphone in 16
levels.
• The factory default setting is “7”.
•Touch the level indicator button of the Microphone
Gain item to adjust the input level.
Note:
• The input level of the microphone can be affected by its
surroundings. Adjust the level if the person on the other
end of the telephone has a reception problem.

Register your cellular phone (Pairing)

You can register up to 5 cellular phones. The
registering method is as same as “Registering your
Bluetooth audio player”
1. Turn on the power of the cellular phone you wish to
register.
2. Touch the Device key [
] to display the Device
Select screen.
3. Touch the [
] key to display the Inquiring Device
screen.
40
NX501/NZ501
4. Touch your desired Cellular key to select the key
for the cellular phone to be registered. And press
the[
] key to register for the Bluetooth audio
player.
• You cannot select the Cellular key of which another
cellular phone is already registered. Select a blank
Cellular key.
5. If entering the Pass Key code is prompted on your
cellular phone, enter the Pass Key code set in this unit.
• You can change the Pass key setting of this unit
from the BT Info screen under the
Telephone Settings screen.
• You can also add the favorite icon to the connected
device. There are 10 favorite icons for selecting.
When the pairing operation completes, the registered
cellular phone is set as the current telephone, and
the display returns to the Telephone screen.
Note:
• You cannot register the same cellular phone which is
already registered. If you wish to change the Cellular key
registered, once delete the corresponding cellular phone
from the current Cellular key, and then register it again to
your desired Cellular key.
• To delete the cellular phone registration
1.Touch the [
] key to delete the device. A
confirmation screen is displayed.
2.Touch the [
] key to confirm delete.

Select the cellular phone

To change the current cellular phone to the other
device which is already registered, perform the
following operation.
1. Touch the [
] key to display the Device Select
screen.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nz501

Table of Contents