Selecting The Bluetooth Audio Player; Controlling The Bluetooth Audio Player - Clarion NX501 Owner's Manual & Installation Manual

4. Touch your desired Device and press the[
key to register for the Bluetooth audio player..
5. If entering the Pass Key code is prompted on your
Bluetooth audio player, enter the Pass Key code set
to this unit.
• You can change the Pass key setting of this unit
from the BT Info screen.
• You also can add the favorite icon to the connected
device. There are 10 favorite icons for selection.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Press [
will return to the Bluetooth audio mode screen.
Note:
• You cannot register the same Bluetooth audio player
which is already registered.. If you wish to change the
Device key registered, once delete the corresponding
Bluetooth audio player from the previous Device key, and
then register it again to your desired Device key.
• To delete the Bluetooth audio player registration
1. Touch the [ ] key to delete the device.
A confirmation screen is displayed.
2. Touch the [ ] key to confirm delete.

Selecting the Bluetooth audio player

To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1. Touch the Device key to [ ] display the Device
Select screen.
2. Touch the currently connected device, then press
the [ ] key to disconnect the active device.
38 NX501/NZ501
3. Touch the desired Device key you wish to use.
Press [
The corresponding cellular phone is set as current
telephone.
• If the power of the cellular phone is not turned on,
turn it on.
• The cellular phone may prompt to acknowledge the
Bluetooth connection or ask to enter the Pass Key
code of this unit.
]
Perform these operations according to the message
displayed.
4. Touch the [
screen.

Controlling the Bluetooth audio player

Note:
• Occasionally, depending on the environment, playback
sounds may be fragmented, or switch noises may be
generated.
Playing a music
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
• When playback is not started for some devices,
touch the [
Pausing playback
1. Touch the [
Playback pauses.
2. To resume playback, touch the [
] button, the display
resumes.
Skipping a track (searching)
3. Press the [
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
4. Press the [
Tracks are stopped, press the [
the first Track.
] key to select it as your active device.
] key to return to the previous
] key manually.
] key during playback.
] or [ ] button during playback.
] button during playback.
] button to playback
] key. Playback