Building A Route From The List Of Destinations (Create Route) - Clarion NX501 Owner's Manual & Installation Manual

destination.
6. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
Note!
Only geotagged JPG files contain location information. That is why these kind of files can
only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted SD card or USB pendrive, either in the root folder or
in a "pictures" folder.

3.1.9 Building a route from the list of destinations (Create Route)

You can also build your route destination by destination from the My Route menu.
1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Tap
4. There is only one line in the list of route points, the start point of the route, normally the current
GPS position.
5. Tap to select the destination.
to confirm the destination, or tap
and start your journey.
.
to modify route parameters, or tap
to return to the Navigation menu.
.
to select a different
NX501/NZ501 English 56